Julian

No problem! Is there any possible way of doing kinda what ROE does? i know previously you were against it because you said it took away from posting.

the new chatroom isn't working for me, just sits there saying its still loading. after awhile nothing happened.

you're about to have PM

you're about to have PM

I'm utterly confused to be honest. It should be external dimensions. I PMed you Shizzzon not to long ago about designing a wall for me.

i see.

Increase port width to 8" with no length it's tuned to 38.44 Hz. with 240 In2. What do you mean by "No length"?

AQ requimends 16 inch per cuft that would equal 192 on the site it said fall within 10% of that number

is more port area a bad thing?

That's what AQ recommendeds for the HDC3 18's

everything right except the tuning frequency! how can i get it to the 38 hz?

Yes double thick so it would be a thickness of 1.5inch

Someone willing to check my math? I came up with 13.92188 net with 195 inch of port tuned to 38hz im probably very wrong, I don't know yet

I think i have my final design ready. to make sure the port is not added into the enclosure? the width of the port is subtracted from it correct?

Thats what i thought

Basically to beat it daily and be able to compete with it

I am designing my wall in my 95 Lumina, It is a four door Sedan. The wall will go up to the front seats. I was planning on making the port on the drivers side Vertically with two 18's like so On the other hand my father said it would be better to do the port on the top or the bottom with the woofers above the port. Is this true?

An oscilloscope would be the best thing to set your gains. You could talk to Jacob about getting different options on the Nighshades for them to handle more power.

Touche, i'd rather be safe than see my amplifier overheat and smoke due to low voltage.

More AH never hurt anyone lol. I'm going to have ~3 Deka's for my Saz-3000d

http://www.soundsolutionsaudio.com/store/categories/Batteries-%26-Electrical/XS-Power/ right there!

No problem! I thought the Yellow tops were only rated at ~55AH? unless it's a larger sized battery. But for the most part i've only seen the yellow tops around here that are 55AH, look into some Deka Intimidator 9A31 (100 ah)for $187.81 or the XS Power batteries (D2700) 103AH for $299.00. Shizzzon explained to me that the Deka's have a lower float value than the Xs batteries.

I know right? They have a ton of good informational videos. I've learned a lot from them surprisingly. They water it down to a normal persons thought process without leaving out key information.

If i remember right, every ~1,000 watts an additional 70 amps is pulled. that should help!

thanks man! I'm hoping to start my wall soon its going to be sick