CBFryman

also, for comparison, that cooler in the back is 4cuft inside

finally its finished, just need to wait untill the chaulk dries...and i need to smooth out the ports (kinda a gap i need to fill too. but its at the top where my funk port deisgn made me trim the mounting sheet of the baffle to fit leaving a little gap, no leaks) all thread in and everything. just need to bolt it and hook up the amp and install the driver oh and one more comparo pic, esspecially for demin (or how ever you spell it)

here paint owns me 4 evah the onlything this doesnt include is the to ocmmunication module (easy enough, plug and mount) and starter bypass, window roll up (dont care) and hood switch (green/black, Brown/black, and blue/black respectively if it matters) http://i11.photobucket.com/albums/a167/CBF...eingdiagram.bmp

ive never even helped installing a security system before...led alone one this complicated. I have a pheonix digital (i know) PD-175. The only major problems i could find with this was the rem starter. and i have a manual so i dont give a rats ass about that chit. Now i have manual locks. so it obviously isnt going to be controlling my locks. however its talking about the door pin trigger? WTF? im geussing this is the wire that knows when a door has been opened to send that current to a relay to turn on the dome light. there was a thing on here about getting a CD instalation help guide thing and i asked but never got one. oh well. maybe you guys can help me. im looking around on the 12 volt to find out if i have a positive or negative trigger. but can anyone tell me where i can find this trigger? also. how does this siren connect. from the diagram all i can geuss is i splice the red from the siren into the purple from the control module and then ground the siren? i geuss it already has the circut built into it to determine the pitch/what it says? and if this is the case, eventually id like to get a pair of these pain inducers. could i just send the purple to a relay and then run the siren and the pain inducers off of the relay? also, where am i going to mount this? inside the cab or in the engine compartment. id rather have to run the least ammount of wires i can. 1 drill throuhgt the firewall and 1 grommet maximum if i can (hopefully only for thedoor trigger) really i dont think i need the door trigger. the module sets up to where if you dont open the door with in 40sec it tries to relock your doors. but since it isnt going to lock my doors because i dont have power locks that doesnt really help me. except for that i assume it rearms the system as wel land is going to go off in 40sec after i startthe car and its going to tell me there was an illegal start or some BS. of course it isnt even being wired into my iggnition but the alarm/horn/lights should be going crazy because it will sence the vibration form the engine and the Gforces from the movement. and i will look stupid driving a vehicle with the alarm going off so any help would be greatly appreciated. i tried taking pictures of the wireing diagram but i just cant get it clear so i will draw it up in paint as best i can and post it asap. i would be asking this on the 12 volt but they pay no mind to me and thoes froms move so damn fast.

meh.... thermal powerhandleing never changes, however mechanical does. above tuneing (especially near it) mechanical poerhandleing is greater. this is due tothe fact that hte air in the port has mass and hte speaker has to move it causing more resistance. below tuning (as already stated) the sub unloads and mechanical powerhandleing is decresed because it moves a LOT further. a port does nothing more than put backwaves from the speaker back to the front with a delay to keep them in phase. its "tuning" is simply a result of the mass of the air's resonant frequincy in relation to the volume of the enclsoure inside. its kinda hard to explain why there is a bump in SPL around tuning, so think of it this way. while playing the trombone to change the pitch you change the lendgth of the "port" which you are making your "buhhhhhhhhhhhhhhhhhhhhhh" sound through. the longer you make your "port" the louder the frequincy that makes up a small portion of that "buhhhhhh" gets due to the acoustical properties of the "prort" as you shorten it the same happens with a higher frequncy. however with a low enought tuning and the right ammount of volume ported responce and be nearly as flat as sealed with a Qtc of 0.707 but with an even mroe extended responce. this usually requires a large enclosure with a port tuned quite low. in car you dont need much below 28-30Hz because music doesnt get that low. so that is usually where most tune to with the biggest enclsorue they can spare for the flattest responce possible. in stupid, the air dun like 2 move. so ahen dat air reacts 2 the air in the box. it wants to move least @ a certian moves per secund. this be teh tuning. it be boosted cus the speaker may still have duh movement to keep movin.

*busts out the oxy acetalien (sp) torch* *doesnt work* *plasma cutter* *basket go bye bye*

Why is it Member no. 1 never posts? SSaudio...WTF are you doing?? lol

supa...how the hell is it you have 12k posts yet youve only been here 3 months before me?

BX1205D these pics look familure? i just noticed i mounted my bass knob sorta crooked...oh well oh and update pics that is one tight ass fit. im looking for some 100 grit for the belt sander...gonna run it around a few times to get an extra 16th of an inch or clearance or so. w/e its called i wanted the 6spoke...the one that looks like DD's higher end and IDmaxes basket but for 18's (so its 6 spoke instead of 4). but it doesnt matter because the 12 spoke sapposeably has better rear ventelation (better for ported) and im not mounting it inverted. but i just thought it was something different. i geuss when chad took the pics it was back when there was an 18" basket shortage in the 12 spoke (which is why RE was out of 18's which is why i ended up with this instead of an SX18...and i think i will be happier with this. not louder, but happier)

BX1205D

lmao...i was looking for my luckey board shorts.... hopefully the hurricane wont hit. sorry for the dirt socks and homemade indo board laying on the floor (if you dont know what an indo board is and actually care look it up on google as ill be leaving soon. i know it is a must know before the weekend comes, lol) ok i lied. its like that most of the time. im a teenage guy...i dont care...lol

Comp VR's are good drivers. some of the only kicker i would have for daily (but nothing beats internet brand price per perfomrnace). but when a friend had one typeR 12 in his old skool silverado...that one ing 2.2cuft tuned to 35Hz SLAMMED like few other 12's out there in extended cab trucks (horrible for SPL as you all know). even if you seal them you will be happy. im thinking fiberglass enclosure (still portd though) with a silver (to match the cone ) gel coat (instead of chitty paint... ohhh ya baby

sexah

doesnt bother me none since im not mounting it inverted, but that backplate is so sexy i wish i could. anyway. some rubbing compount and some elbo gresses then polish and they will be shiny agian.

http://www.soundsolutionsaudio.com/forum/i...459entry90459 we are leaving for olrando before i get to finish my enclsoure... :'( oh well. what sucks is that i wanted the venusuella basket but got the 12 spoke... i geuss they where just using the venusalla basket while the 12 spoke 18 basket was unavalable.

Chad...you didnt do me wrong... GAWG DAMN!!! heavy duty crate=good. SHAWAMMY everything i got on my Bday (today is my real B-day, sorry i listed the wrong day, lmao) makes 2 10's look puney gadunkadunk "she's a tighe one though, i could only get 2 vingers..." LMAO just an FYI....this dust cap is larger than a CD

Mo Pics Fooo my REM turn on, lol. stock HU for a while

so yo ucan wear it and look like loyd L...

i cant afford silver wire for my RCA's, however i do use 16awg copper 2turns per inch then sheilded OR 2 pairs form the cat5 cable.

Paradise City -Guns'n'Roses Next On The Play List Hearbreaker-Led Zepplin Back IN Black -AC/DC Smoke On The Water- Deep Purple

yes It takes a good deadner to withstand the CA/AZ heat <{POST_SNAPBACK}> /FL heat/humidity combined

lol i put the wrong B-day on my profile..im such a dumbass...

early is better than late...lol its tomarrow...the 8th the day i get my 18... ive been working my ass off since i got off work early to get all of the wireing done (power, ground, fuses, REM turn on new batery lugs) and now i jsut need to test fit the baffle for the 18 and everything is good do go. maybe i will get a listen before i head to orlando. i didnt know i was so popular...lol July 19th...my License app.... if your in Nth Florida get off the road

oh ya, drowning pool....geuss the song...lol