kritikos2008

I have a optima yellowtop under the hood and 2 d925 in the back

Okay i was wrong on size of the box. Is is 32X30X15 so thats 8.3 CUFT before displacement and ports. Is that still real small>

It was dumb to throw 2-15"s in that small enclosure(no offense). You will get louder with one 15 or 2-12"s in that enclosure, your choking the life out of those 15"s. If I go over the window line do you think I could get enough CF with another box?

I am running 2 15" BL'S with a Crunch GP3000D PRO In a 1989 Crx My box is like 4.5 CF Interchangable ports tuned to 36 hz for daily and tuned to 53hz for Comp. I know that the box is a little small for the subs but I could not go any bigger and still be under the window line. I'm hitting a 148.1 outlaw and 147.7 legal. I want higher numbers. Would it be dumb to build a wall? I have to powermaster xs 925 and My voltage stays to about 13.5. Any other help would be great. Thanks all

So do you run the postive to the negative on the same coil. Or do you run the Positive on the right coil to the Negative on the left side?

I have a pair of BL 15 1ohm subs. I wanted to keep the subs at 1 ohm. So I should wire them on one side of the coil - to + then connect the + on one sub to the + on the other sub. Then the - on 1 side to the negative on the other side. then a + and a - out to the amp. But instead of the - to the + on the same side I have the - on one coil going to the + on the the other coil. Does it matter?

Thanks Shane. Can't wait for my sub to get here LOL.

I just ordered a 15'" bl. I order a dual 1 cause I wanted to run 1ohm. I forgot that with 1 ohm you can only got to 2 or .5. If I get another bl dual 1 could I wire it in a (series/parallel) and get 1 ohm. Thanks all