BoomBoxB

just got off the phone with DC power Eng, and they told me 180 amp is 429$ and 220 is 509$ but the 180 idles at a higher amp than the 220 has anyone dealt with them? is it worth the extra cash? Mechman 250 amp for 499$ 150 amps at idle. breakin bank

the problem is if i get another battery i dont want to strain my stock alt to much charging two batteries. yea its around 400 ill get rates for 200 amp alts iraggi 399$ excessive amperage 375$ (went with them before but wasnt to happy) dc power eng (calling for quote) Mechman (calling for quote)

Crap, looks like i gotta dip a little further into my tax return, hahaha add another 300$ just for some Bass, hahaha wish i wasn't so addicted to this stuff.

thanks for the info topgun. much appreciated

I'm going to be running a SAZ-1500d at 1 ohm on a 15" FI BL. Question is, i have the big 3 done in 0 gauge and a optima red top in a scion xb with i believe a 80 amp alt (stock). will i have any problems? I plan to get a 200 amp alt and an extra battery but would like to wait if my electrical can handle it. thanks, Justin

he stands behind his work, but anyway... almost everyone here says you can build a box w/o screws, so ill go by what they say. And if it doesn't work and explodes, ill just build another one with screws and let you know you were right. hahah

http://www.pwkdesigns.com/blog/ I dont see any screws, and imo are CLEANNNNN.

wow thanks for all the reply's guys, i should get my box plans from pwkdesigns.com this week, so ill start building, and let you know how it goes.

ok thats what i want to hear. thanks for the help. ill let everyone know how it comes out next week.

i dont think 1500 watts to one sub is baby bass, but it sure aint 3k, im just trying to make the cleanest box i possibly can, while making it sound great.

Thanks for all the responses, defiantly have some good info to get this thing going. looks like i picked the right forum to post questions up on

I want to rout the edges and dont want to take a chance of clipping a screw and getting hurt/messing up the wood. thanks tho

do you think i will need screws if its just a FI BL 15 with a SAZ-1500d, maybe i should just keep the screws minimal. thanks for the input.

it looks CLEAN I want to rout out all the edges with a big bit and give the box a SMOOTH look, also covering it in bedliner instead of the normal carpet/fabric i usually do. kinda just want to challenge myself too, building normal boxes all the time gets old. thanks for the help.

hahha ok cool, i always heard screws are there just to hold the box while the glue dries. thanks

I'm building a ported box at 32hz for my 15 BL, it will be 13 3/4 Deep 37 1/2 Wide 20 1/2 Tall. I have never built a screwless box. So what glue will i need? any tips on how to go about it? I have built about 5 boxes and they came out great so i do have the "skills" Thanks, Justin

great thanks guys

So here's the question, i just got my saz-1500d in the mail yesterday, and there is a bass knob.. i only really see noobs with one. so are they worth it, i always just tossed them. if i was to turn it up all the way would it start clipping my amp or will it only raise my gain to where it is at on my amp? i have no problem turning down the sub on my headunit.

:clap: