Jay-C76

Then....what is the wire connected to?????? an amp.....???? Fuses protect anything in the line after the fuse point. Before I started fusing power dist, i've blown a internal fuse to an amp once that melted the connection on the mainboard of the amp....(a quick fix, but not fun) A sharp birr in the car somewhere dug into the power feed over time and grounded out... You try to avoid things at all cost but over time fact is things can happen.. I'll always fuse any dist. block that feeds power to multiple amps, even if the amp has an internal/onboard fuse..... Never had a problem and I usually test full power all the way from the alt to the amp....14.9 all the time!

....LOL That koiiler 1000 watt 2-ch isn't pushing 1000rms...more like close to 1000 peak... so it's not really dumping that much juice through any wire...

Funny.... Red Green would be proud! Other than that...

Oh if I only had 2 more Icons....LOL Itching to hear it I bet! Snatch up them tools and get to work!!! LMAO Oh....And don't forget to snap lots of pics too!!!!!!!!!

Absolute crap..... Is two words I would NOT use to descibe that! Looks great! I should've known after the 4~10's you were going to do something crazy... I like it!

Congrats man! Stick with the further education and learn everything you can! I was a bit of a partying dumbass when I went to college.

Sweet! Thanks for the input guys! (I kinda liked the black one better too!) I think the black makes everything look more "stealthy".

That H/U install is ghetto as it gets!LOL And that was an actual self proclaimed install shop? That's embarrasing if so.....(for them not you) Keep chuggin' ! It should look real nice.

Looks a little tight... I agree with the mounting depth issue.

Today is new front battery bracket day! LOL I'll be bending up a new bracket for the front battery today. 10ga. polished stainless plate... I'll update pics when I'm done with it. If time allows I still have some fabric to do in the front cab as well.

8ga. power wire.... That's my sub wire! LOL A fuse block would be better to use in your case. Use the one you have now as a ground block..(b/c no fuse is needed on ground)

I've never had resin make mdf more brittle..... I know this for a fact, after actually using this for years the resin soaks into the mdf and actually makes it tougher. The f/g fibers will actually make it tough as metal. Hardened poly resin is rock hard pretty tough itself.. I can snap a 6" wide strip of mdf with ease, after resin is applied to the surfaces it's a lot harder to snap.... It also helps around the sub cut out to keep you from blowing out the holes for screwing the subs in. Run the all thread before you coat anything, then apply the resin to the all thread as well. it will help to minimize any vibrations as well as seal up the hole from the all thread...

Which looks better, the silver or the black grill? I put the black one in for comparison...(I cut 2)

Blow out the glass!!! FTW!!! If you try...I'll try to blow mine out! Mine's split all the way across!

Welcome to the forum!

This should be good! Get to choppin' ...LOL

WoW, now I feel old............ I graduated in 94' college in 97' ......... Thanks guys.......

This lil' thing will be done tomorrow. The windshield may be another story....LOL I'm scaping and saving at this point....

The best info I've found on the rules for each is found on www.soundoff.org As long as I can get my windshield replaced in time I'll be there... I'm trying to work as many hours as they'll let me but, my work has cut hours due to lack of work... I got off work at 12:30 today so, that puts a damper on the paycheck.... That being said, I had some time to play with the truck today! A few unfinished pics.... I'm about half way done with this... I think the finished product will be way more appealing to the eye. I hope to light the inside with blue neon, then replace that with LED in the future.

I just got mine a few months ago.. I LOVE EM' !!! You would have to pry these from my cold dead hands to get me to ever switch to another sub company.. And if the Icons are this good.....then the Xcons would make you wet yourself!

SSA all the way!!!! Having seen both brand on design software... The SSA's are your best bet if you like to listen wide variety of music. The response on SSA subs is superior across the REL board.... If you just want loud with peekish response then try Fi... x10 on the customer service comment for SSA.... They're one of if not the best in customer service.

Oh lord...... I can only begin to imagine what you have in mind.... Love the pics! Was keeping the two port radius equal, difficult.... It was when I did the one for the 4~R/F T1's. I had to keep stepping back to get a good look at them. Truely one bad a** enclosure you've designed there! (Two thumbs way up!)

Order up!!!! One scrambled brain, with a side of deafness!!!LOL Those are going to unleash a world of BOOM!!!

Uh oh!!! What am I going to do with this???? I'll post some pics of my idea later tonight. I have a little work to do....

Will do! As it sits right now the enclosure is tuned to 29hz. on 1650rms to 2~15" Icons