reaper68

I still like Leviathan, either way I know the 6 channel will be coming home with me. no show me the pics :bigclap:

For the most part I deal with portions of GM for packaging. Specifically GM powertrain and GM NAC. I also handle a lot of the designs for Sauer Danfoss, All-Pac, Elring Klinger, etc. as far as returnable packaging goes. I have not dealt with the company you mentioned personally, but there are three other coordinators plus designers so its probably in the mix there somewhere. Back on topic send me 4 of these bad boys they are like the super man version of my TC 4hp's

Really? I'm a project coordinator there and handle a lot of designs that come through.

What type of material were you using for you spacers. We deal with foamed hdpe etc on our structural foam side of the operation etc. Let me know here's the company http://www.robinsonind.com/

Hello, First off I really like this product line it basically is an improvement on my favorite subs off all time the Audiomobile EVO-R 15. Anyways I was just wondering if you are still sourcing product from tc sounds some how of if you have your own tooling etc. Just wondering hope this isn't against any rules or anything

Hurry sir Either way I want know how they actually sound. is there T/S parameters anywhere on them? Two with a Hifonics Sampson sound like a good daily setup

Somthing D O O economics? Bueller... Bueller...

Hmm must own 21" SUBS really though I have got to get a vehicle just to put a pair in. What type of enclosure size are we talking about here?

So 2 21's off mtx ta92001's be alright daily in a wall?

Granted I've ran a lot of tc based product over the years so I'm pretty sure that the P's should handle the power but just wondering a couple of things. First whats the coil in it like winding length and layers if you don't mind and is that the tall profile surround on it? Just wondering because I may be picking up a pair in a couple of months.

S's LMT just thinking out loud type deal either the tarantulas, my tru sh-1's or maybe ms1000's from phoenix gold

Just wondering what you guys think it would be about 2500 rms to each If I can get the power to the amps. Probably sealed 2 cubes or maybe 2.5 port don't know. Just throwing it out there

Another thought on neo is its loss of magnetism after being exposed to high temps which is part of the reason maching it can be such a bear. Other that the cost a it would seem to be an acceptable idea but then your typical consumer would look at it and say somthing like its got such a small mag it can't be good.

so you guys are making that bad ass neo 18 that Stephen was talking about a few years back sweet

true but when looking a woofers strength and how it will react in lets say a ported enclosure bl would be of intrest if you are after SPL such as 4hp and RE MT which both have bl in the 40's you are right though that for the most part you would need to know how they measured and what the results were etc and that for the most part its kinda of a misnomer

Look at BL if you want to know how strong a motor is weight doesn't really matter look at neo motor's such as the aura 1808 or mrt version looks pretty wimpy but they are a dam stout motor or shocker neo's etc. Or you could get a graph of the gauss field that would also help out. Also I'm fairly sure the slugs are duoble stacked 7.75 by either .75 or 1.00 don't know exact but thats pretty much what it looks like from the pics try this link http://tcsounds.com/TC9_15_2570.htm

Thats to bad you right why would someone want a 6000 when you can just use mlt to get even more retarded amounts of power

Thats good to here Thilo put together a very nice prototype 4hp 18 for me but Ihaven't been able to get ahold of them through email in a long time

Speaking of TC sounds does Heather or Thilo still work for you guys?

just out of pure intrest are any 6000 boards laying around

Well if this new job comes through I will be serious

So what type of deal are we talking will they do the 6' heat sink with 3 or 4 boards under it that would be pretty sweet to get 3 2000 (or their new varient) then do three rows of them in the bed of the s-10 I just picked up if I get the new job I'm after I may have to bother you about this idea.

I think 18's in general are a good move p series would be a good move as well although I'm pretty attached to my pair of 18's Emm deaf is good

Just wondering if US will be making anymore really large ab's like the 6000x etc or what happend to the ones they had left I always wanted to play with one. Anyways back on topic the only reason I ask is because 1 I love Ab's even if they do pull amps like crazy, and 2 because I also like soundsplinters LMT's but since they are 4ohm your pretty limited and most big ab's make power at either 4 or 2 ohms.

Just have them build when requested then you wouldn't have to worry about over head you could even do a no warrenty deal I waited about 2 weeks for my first 18, 3 months for 4 15 3hps with the tall thin suround and about 3 months on the last 18 waiting is not a problem. I really not seeing that huge of jump in production lets say maybe max 50-100 over a 15 least wise if you use pretty much off the shelf parts Pretty sure TC has all the parts at hand. Just a thought and wishful thinking