tech2332

Here is the Re Audio Box Calc. http://www.reaudio.com/speaker_box/LPort_Box_Calc.html

Pioneer 5000ub. Got mine for less than $200 with wires & everything off Crutchfield.com

1.5 cu ft each??? Thats the average amount of air space for a ported 10" and a sealed 12". I think you got that wrong. I check the website for Polk Audio MM 15" and it's 3.5 cu ft.

Thanks crosspug but i decided to get a 10" SSA Icon with a custom box from Audibel Customs

Not in every case. (i.e. zx2500.1) Read again...you just named ONE amp out of all mono channel amps. What he said in this case is true. Actually indytrucks was right. The ZX2500.1 isn't stable at one ohm. It sends 2500 watts rms at 2 Ohms. :clap: for me.

Crazy!!...I sent you an e-mail already.

Thanks alot!. Now I just have to come up with a design for singlecab box.

I'm pretty much set on what I want to get. 2 Mach5 IXL 10's 1 Phoenix Gold RSD 1200.1 Ported Box tuned to 34 or 35 Hz Each sub will be getting 600 Watts rms. Is this a pretty good set-up for a good amount of SQ and loudness(Right now I have 2 12" Memphis in 2 supersmall wedge enclosures(Sealed) and 300 watts total) ? Another question about the box. Should I put both in same compartment or each in sperate compartments with their own ports.?

Exactly. That why if I were to upgrade to 2 of them then I could set it to 2 Ohms.

Exactly I only want 1. And Dual 2 Ohm can only be wired to 1ohm & 4 Ohms loads. Where Dual 4 Ohm can be wired to 2Ohms.

In terms of loudness, in a ported box tuned to 34 Hz, which would be louder? Mach5 IXL 10 or RE SX 10"? I know the Mach5 is cheaper, and can fit in a tighter box but I hate that it comes in Dual 2 Ohm. I wish it were Dual 4's. I've seen a review here where the Mach5 SPL got metered and was fairly high with the RE MT. If there's someone here who has heard both(IXL 10" & RE SX 10") please answer.

loudness overall

Would the Mach5 IXL be better than Kicker or Jl's. I'm assuming yes.

I have a single cab 2008 Chevy Silverado with 2 Memphis 12's but have them in a tiny box. I've been looking for 10's that would suit my needs and have been thinking about 1 Fi SSD 10" but now might go ahead for 2 Mach5 Audio IXL 10's. Are these subs good?(Quality & Loudness). How big should each sub get tuned to 34 Hz? Thanks in advance!

Just cuz its an Fi Forum does't mean everyboxdy here is gonna like it. Besides if you look at the replies they both said RE SE. So "I guess i'm gonna go wit the Ford".

Cool so I guess i'll go with the RE SE 10". It's also cheaper.

So i'm going to have someone build me a custom box for my single cab truck. I have a MTX RFL600D that pushes 600 Watts Rms @ 2 Ohms. I was wondering what would be better a RE SE 10" or FI SSD 10"? What should I port it to for rap and hiphop?