Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

CrazyKenKid

SSA Regular
  • Joined

  • Last visited

Everything posted by CrazyKenKid

  1. also how are you getting your voltage readings? via dmm? via 2-dmm to make sure 1 dmm isn't jacked? or via voltmeter? if via voltmeter (stinger in particular) did CALIBRATE the voltmeter?
  2. but ya 13.1 is pretty good at full tilt. without a h/o or more batteries or 16volt batteries bank. also what rpm is your car at when you are at 13.1 volts? idle
  3. it is 2ohm stable not 1 ohm! it is a miss type!! trust us it is 2ohm stable
  4. I didn't know how that would show to him so I took it out. Ask me about how I treat my AP3k? lol. so how do you treat your AP3K? with sweet sweet love?
  5. okay to rephrase what i have said they are the best I HAVE heard! compared to the numerous amout of comps i have heard. and i do like hat and dls over zapco but zapco fell into my price range at the time i was looking! so i am sure there are much better comps but i heaven't heard them so i am not going to compare to something i havent' heard!!!!
  6. ap is 2ohm stable check the book if you are looking on ebay most seller label ti as 1ohm which is incorrect! which will push harder? how about whihc will be more bang fro your buck? (AP) to know about AP ask shizzzon about it he has done testing and what not!
  7. i say go with audio pipe!! or a used kicker 1500zx!
  8. just like sex! lol! the only thing better is hat audio (hybrid audio tech) or dls iodine.. i think you spell it off hand!
  9. umm i say go with the battery but really give it a second or 2 and lets see what other ppl think! but sign my vote for a battery over an alt but for prolonged listening..i would go with a battery!
  10. my upgrade kit worked for my car BUT i didn't need it as my electrical was alreay strong enough with 2-batcap 2000's (50ah each) and big 3!! with a stock 105-120amps!! at any rate if you have the battery bank to bakc up your system you will have no real issue the alt is used to recharge your battery (s) not support the constant draw of the car audio setup right
  11. you say your alt is already 180amps lol it is pretty beefy already. i say get a battery and go from there! you are running 1600~rms so i sya get a kinetik hc2000 or something similar like a deka and you should be good to rock and roll. try to aviod used as we don't know how much abuse ppl hammer on those batteries lol but if yo uhave to go used get someone nice and reliable who doesn't rape there batteries and also know what he is doing!
  12. um i woud say get another battery in the trunk close to the amp and put a voltage meter on it to keep track of the voltage to the amp!
  13. ya same with my zapco components there is a jumper whihc is a pain in the @$$ to get to lol
  14. umm batteries? how many batteries do you have and what is there rating?
  15. bi-amping..shouldn't there be a toggle switch or somethign on the back to turn it on or off? (lol how would you know this without the site being up lol sorry ) and do you know what by-amping means?
  16. *bows* you are smart!! i am so buying somethign liek that for the rebuild!!!!!
  17. yes 1channel per set of door! so if you have front left and front right you only need a 2 channel amp! you run some 16awg wire to the crossover and into tthe woofer area and then jump from the woofer area to the tweeter area with a piece of 16awg wire about 1inch long depending on the distance away! and don't forget to use sound deadener!!!!!!
  18. LMAO i live in sarnia ontario right now for school! lol we are just a stone toss away!
  19. 38.7 is correct! did you unplug the sub from the amp? also the numbers you are getting are the numbers from the h/u if your preout voltage is 2volts then set your gain to 2volts and call it a day! if you need it louder turn it up a bit at your own risk lol!
  20. yes b/c that is the way i did mine! is it correct...maybe but i was never told it was wrong! so today we will both find out if it is correct to do it this way! lol!! just a quick question whihc 3 amps are you running? but even still in the pic it shows the accessories tieing into 1 single point!
  21. how about 2-saz 2000's? strapped they output 4000+ at 2ohm lol!!! and x2 on what notorious from martinique and impious said
  22. sweet!!! make sure to post some pics!!! and thanks for the update
  23. and a smaller box allows you to feed the sub extra power! not sure how much hell nto even sure on the sub or potential amp being used lol!

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.