detonnation

Is there any advantage or disadvantage in going with the Bp version. Plus should I get the 2 ohm version? Right now Ive got 600w into 2 ohms.. The Pioneer Mono doesnt do 1 ohm... I will upgrade someday... And lastly with the SQ of this sub be much better than the Pioneer sub I have? Below are the specs and I know specs dont mean that much... Thanks for your responses in advance!!! Mike Pioneer TS-W1208D4 Size 12" Woofer Cone Material Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone Woofer Cone Design Cone Reinforcement Arcs Surround Wide Roll, Three-Layer Fiber Woven Radial Voice Coil 4-Layer, Long Voice Coil Voice Coil Wire Copper Voice Coil Bobbin Phenol Resin Coated Glass Cloth Damper (Spider) Aramid Fiber Damper Ring Yes Top Plate Standard Projected Pole Yoke with Vented Pole Magnet Construction Double Mass High-Power (83oz) Basket Design Stamped Basket with Magnet Cover Gasket ABS Wire Terminals Integrated Single-Sided Silver Compression Terminals Specifications Watts MAX. Music Power 1400 Watts Watts Nominal Power Handling 400 Watts Frequency Response 20 Hz to 180 Hz Sensitivity D2 (91dB) / D4 (92dB) Ohm Rating D2 (1 or 4 ohm) D4 (2 or 8 ohm) Recommended Enclosure 0.85 ~ 1.75 Cubic Feet Dimensions 327 mm x 172 mm Mounting Depth 153 mm Accessory Grill UD-G308

Just to be clear, you are going to lose a TON of output going sealed. I do like sealed enclosures, but if you want to bump, this is the wrong enclosure for you. Sealed is more accurate though, so if you are going for SQ sealed is the way to go. Mike **oops didnt see page 2..

awesome.. Right now I have a Pioneer sub which is not bad.. but the lows are a bit soft, murky and I need detailed and musical. Over SPL. Thanks for the hellos! Mike

from Long Island. Looking to get a Fi Q 12" .... Peace. Mike