theKeety

I know what I did wrong, bass boost kids,..... really don't fuck it with it. I was skeptical as to how damaging it can be to the sub within a short period of time, once I got the yellow top... the amp was putting out more than ever before. I had it in my head to turn the bass boost off completely but instead forgot too.... one hour after installing the new battery, bass boost on, sub to shit. If I have to make a box I will, I don't think the downfall of the sub was based on the box this time. I'm going to keep my current amp the zx 750.1, DVC 1 or DVC 2? ...... Final answer..... and its not like one 12" makes shit excessively rattle at a red light, I'm just an attention whore yah know, nah just fugging around. You people get so off subject.

Alright one mono block, zx 750.1, and one sub, fi ssd. Ok 1 ohm dvc? Ok, so this is what I need to order for the max output and suiting the amp for the sub. I really don't want to waist my time and money and have to return it, thinks. Can I just get a confirmation on this.

..... What option should I chose 1ohm or 2ohm? I just want to order the damn thing already.

I know this post really isn't to useful, my bad on that part. Why do people idolize and concern over Steve so much?..... $.... the key to your shit slamming. Alright, off with the rambling but I can't even see the link for the video.

What happened was, I was using bass boost set in the middle( because my voltage was dropping at higher volumes, so I used it as temporary solution for some extra bump). Then I got a new yellow top and then forgot to turn the bass boost off and the zx then was working to its full potential and then I forgot I left the bass boost on, it was bound to blow. I'm really not stressing it though, so I would like to get these questions answered. What option should I chose 1ohm or 2ohm, to get the full output going to the SSD with the zx750.1? Would the FI do better sealed then in a ported enclosure, .... as far as my taste in music, I like to be the guy making shit rattle at red light, so I guess maybe I'm aiming for good output but, I chose the SSD since it was described as being a kind of an all around versatile sub. I didn't have much of a problem with going from JL to Kicker, but the Kickers really have little little sq to them. So hopefully I'll gain something new from FI. On another note, I set my gains rather low though, and never heard any audible distortion from the cvx, when I examined it.... I really don't know much mechanically about subs right now, but it was visibly detached from something... should I also be worried about my amp being clipped?

Well recently, I have just purchased a 12" CVX that came in a prefab Kicker enclosure. It was powered off a Kicker ZX 750.1(which seems to be the only decent Kicker purchase I made). I assume with the amp being underrated, and therefore overpowering the CVX caused it to blow. Well now, I'M GOING FI BEEZYS, sorry for the anticipation, but now anyway I would like to power my new setup with the same amp, the Kicker ZX750.1 and replace the sub with a NEW FI SSD 12". Temporarily I will, use the same box.... I know to some extent either the enclosure could make or break the sub hopefully, the prefab kicker box won't make the FI sound like shit. Opinions? I would also like to know what options to chose for this amp, particularly 1 ohm or 2 ohm?