latorgator

Thanks a million man I got some days off comin so Ill start on this build

No problem man.. Im in no big rush, I really appreciate everything though.. Also just out of curiousity you know bout how long it take.. just tryn to get everything together

So after main battery, before and after battery bank in trunk... and they should all be the same amp amount

I am going to be runnin 2 rf t4001bd with 2 15" fully loaded Fi VTL's... Just remember these amps love power lots of power

Hey I have a question.. Where should I mount my fuses for my amps. I know they usually go under the hood but I wasnt sure if they should go after my extra batteries.. Thanks in advance

wonderful man I will definetly talk with him.. I was curious how big of amp should I due 1000.1 ?

The newest thing I have heard is that they will be coming out with a 22" BTL, No idea on when its being released or anything like that

MEnards or lowes was always about the best place I found plexi

I love the clean look of no amps, Are you going to fil in space on both sides of box?

looks very nice

I originally started dueing this after I read it on www.*****.com in one of his build logs... I never crimp any of my connections anymore just solder, What I due is put the ring terminal on the 0/1 guage wire, I then heat up the top of the ring terminal (top of hole were bolt goes through) I usually let it heat up about 3 or 4 minutes. I then take my solder and push it down on top of the wire slowly (after a few minutes of heating up terminal with torch it makes the copper strands hot enough) The solder then is basically sucked into the wire and it will make a very solid connection in the end, alot stronger than crimping (also it looks a hell of alot better) I will try to find meades log on it and due some link for ya

Due the ssa icons take alot of box space? The big reason I was thinking the w6's for him was because the due require very little space in a sealed box...

Any one think 2 jl audio w6's dual 4 ohm in sealed box wit a good 1000.1 amp would sound alrite for his rock music

I love the look of those oversized dust covers, I want some

Everyone's a hater when your stuff is better than anyhting they have ever had

I always go as big as possible and then block it if I need to, it alwas leaves your options open, worst thing is to have to pull old and then re run it in the future

gotta love junkyards

Thanks I just feel real stupid all of a sudden

I got lost somewhere in here with how to make port removeable without screwing it in.. I sorry manbut could you possibly send a pick of one if you have a chance...

Damn sexy I cant wait to get the finished plan I bought about 50 foot of 2" dowels today. have about 5 and half sheets of 3/4 mdf and also alot of fiber glass resin and wood glue.

wonderful.. I like how it sounds.. Also due you think I have "to much amp" some one was telling me to get dual 1 ohm and put 1 of my amps on both.. I have no problem ordering a new set of btls, and just keep these for my other ride.. just want your honest opinion on it

cool cool cool

45 inches between wheel well and I would say right wheel well is 8 wide.. Also I love how you decided the set up I think that will work great

I got a few spare rockford t40001bd amps sittin around the are brand new remans.. I hooked up for testing only to make sure they work right

Also I would like to state that dude basically only listens to rock n roll, And also wat would be some good highs for the car