The Junglist

Hello I purchased this amplifer recently and im after any information you may have on it. US Amps USA 6000. 1 x 6000w RMS Class A/B @ 2 ohms @ 12.6 volts. This amp has been custom modified by Dirk to do about 7000w @ 15volts. The SAT has been disabled to allow 1.5 ohm safe running or lower with a good power supply. It was running happily at 1 ohm in mbh69s car when he had a XA3000D die for ice direct show. This is THE LAST USA-6000 to be produced Specs from USAmps site Two Channel Class AB Amplifier Total Power Output: 6000 Watts RMS 3000 Watts x 2 into 1 Ohms 6000 Watts Bridged into 2 Ohms THD at Rated Power: 0.1% Signal/Noise Ratio: >105dBA Frequency Response: 5Hz-50KHz Damping Factor: >2500 Fuse Rating: 900 Amps Dimensions: 114mm / 4.50in High 229mm / 9.0in Wide 629mm / 24.75in Long Weight: 14.52kg / 32.00lb Variable 24dB Low-Pass Active Crossover Pictures are of my actual amp. I was under the impression old skool us amps where very reliable and solid how ever i have been told to be carefull running this amp as they are known to go pop! I paid alot of money for this amp while i was under the impression it was very solid to hear that they can go pop like this is worrying. Has anyone here any information regarding reliability. thanks