///M5

Geez. Spent another $550 at the grocery store today.

Check your solder joints

Me too.

This is a cheap guide. https://www.homedepot.com/p/Genesis-2-in-Aluminum-Rip-Cutting-Track-System-3-Piece-GAPCS203/206137367?mtc=Shopping-B-F_D25T-G-D25T-25_9_PORTABLE_POWER-Multi-NA-Feed-PLA-NA-NA-PortablePower_PLA&cm_mmc=Shopping-B-F_D25T-G-D25T-25_9_PORTABLE_POWER-Multi-NA-Feed-PLA-NA-NA-PortablePower_PLA-71700000034127218-58700003933021540-92700051577220114&gclid=CjwKCAjw7LX0BRBiEiwA__gNw9p3DOOVRP2CCbd_L5yVgp6XSWIo_MMbzCAQuN8x01NKvcOcGmC_GBoCA6AQAvD_BwE&gclsrc=aw.ds And a much easier to use type: https://www.homedepot.com/p/Kreg-48-in-Accu-Cut-Aluminum-Circular-Saw-Track-KMA2700/302781729?MERCH=REC-_-pipsem-_-206137367-_-302781729-_-N The difference is the kreg takes the need to measure away. There are others too. I spent no time looking, but I have something similar to the Kreg I use for ripping things that are 8' if I don't feel like spending the 20min to pull my cabinet saw out of the corner of the garage.

Metal abortion. GO for it!

Fuck. Sorry.

Awesome. What are you planning?

How much are the L18/27's and how much do you think you should spend.

Two days in a row. Yesterday it was my oven. You are welcome.

By switch, I am just using a surge protector strip

That is how I wired my garage. Ran an extension cord up to the rafters, cut the end off and connected them all in a box. Half way between permanent and wired. It was the easiest and allowed a switch by the outlet which is by the door.

Woot

Just put a plug on the end of a standard el cheapo flourescent fixture. Romex into cheap plug and bam.

Trying to not drink everyday.

Sure post that after we text back and forth a bunch.

Future plans for her?

Single oven? Any idea of budget? Pretty sure everything I point out will be beyond. Should I stay quiet?

Oh fuck

It was sexting pRon

He also sent some GORGEOUS pictures of bread

Links Matt sent (I have not read them yet as I don't want to, will sometime this weekend but I am trying to avoid news for a bit to focus on family instead of doomsday...I did grab a shotgun though) https://www.cnbc.com/2020/03/23/cdc-coronavirus-survived-in-princess-cruise-cabins-up-to-17-days-after-passengers-left.html https://www.cdc.gov/mmwr/volumes/69/wr/mm6912e3.htm https://www.cdc.gov/mmwr/volumes/69/wr/mm6912e3.htm

Although based on the fact they shaded bars I assume they know it and did it right, just aren't sharing and the devil is in the details.

If they posted the measured uncertainty I would feel better. Suffering the same issue as the SMD amp dyno.

It's all good. As you know I research the piss out of anything and can't shop effectively because of it. That has turned to trying to understand how to keep my parents alive and healthy through this.

The media IMO is fucking this one up bad.