its for 2 12 HCs im puttin a bx1000d on each, thinkin about 5 cubes with slot ports. i really dont no how to tune box and stuff so thats why i need plans real bad so i can get the construction underway, thanx

no prob bob, check this site out

http://www.carstereo.com/help/Articles.cfm

thats the main site these are the specific ones u need..

http://www.carstereo.com/help/Articles.cfm?id=45

http://www.carstereo.com/help/Articles.cfm?id=31

if u need more help just ask :thud:

here we go i tried to make some plans wit paint. they suck but hopefully u can tell stuff.

well there they are, hope i tuned it right and did stuff right. Plz correct me if i screwed up im quite good at that. and is the bracing really neccesary? Do i need 2 chambers or will that be to much airflow if they each got there own port. thnx

ok so

29x29x14= 6.8 cu^3 before displacement i believe..

ok so the box u have could work. but i dont think people make them like that, most people have boxes like this

so if u just took out the brace in the middle and moved the slot to either side it would need to be 24.18in long which is fine since the length of ur box is 29in long

so it would the port would be 3.5in wide like u have it, and 24.18in long

comon i need more opinions! lol hopin to start it this weekend

u want a CRX box look at my website its 29x29x14 w/ 4 12" long areo ports

www.sounddomain.com/id/earcandycrx

Edited June 28, 200421 yr by mmatscrx

another one same idea but... not my car these are 10's

Edited June 28, 200421 yr by mmatscrx

need ne more help just ask