Posted October 31, 200717 yr I've been searching all over here and CA.com for vented box specs for my Mag. I've tried using the box calculator at subwoofertools.com and I keep coming up with ~73in^3 of port area. From reading around it seems like I should be closer to the low-mid 60s. Am I correct or should I just stick with the plans swt.com is giving me?
October 31, 200717 yr 70 in^2 is a bit excessive. You can actually stick to 50 in^2 and be just fine. Keep in mind that's a port that measures over 4" tall by 12" wide.
October 31, 200717 yr Author 70 in^2 is a bit excessive. You can actually stick to 50 in^2 and be just fine. Keep in mind that's a port that measures over 4" tall by 12" wide.I'm using a vented baffle enclosure rather than aeroports so that doesn't help me too much.
November 5, 200717 yr The measurements I supplied are for a vented baffle. For a vented baffle multiply vent width by height and you have square inches.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.