Posted January 7, 200817 yr ta92001. anyone messed with this amp? rated 3k @ 1 ohm, birthsheets supposedly read around 3.8k @ 14.4vtrue? good amps? looking to get one to be run @ 1 ohm on an 18" mt.also looking at getting the ta91002 (750w x 2 @ 1 ohm) and the ta7402 (i think thats it)discuss.
January 7, 200817 yr link please...if its like the 1 my co-worker has it is a solid amp, his is an Elite series and has the same or simular specs as you posted...he is pushing 2x Mtx 9500 15" subs ... doing 150.5 @ 45Hz boxx is ported to 35Hz...i personally think its overpriced... i could buy 4 amps for what he paid for that 1 Edited January 7, 200817 yr by Lord Baccus
January 7, 200817 yr Author on ebay its like 550 or something, but i might be getting a part time job at CC http://www.mtx.com/caraudio/products/ampli...hunder92001.cfm
January 7, 200817 yr did i forget to mention that my 2 lil Sondown SAZ 1500d's are kickin his @ss i do a 152db dailly boxx is ported to 36Hz and i do a 154.6 with the spl boxx ported to 54Hz... subs are 2x 2yrs old Soundstream T4 15" Edited January 7, 200817 yr by Lord Baccus
January 9, 200817 yr update : the mtx amp came out of protect !!??!! it is a TE 4000daccual pic of the amp Edited January 10, 200817 yr by Lord Baccus
January 10, 200817 yr Author for my mids.lord baccus- never heard any other problems bout these amps except from you..
January 10, 200817 yr for my mids.lord baccus- never heard any other problems bout these amps except from you..as well for me iv never had a problem with MTX amps we found the problem his positive cable @ the distro block was loose and Arching so the amp went into protection...we got it to reset... its fine now... just happened to hapen wile you posted this thread...i do not have a problem with the amp save it cost too much...i can buy amps just as powerful with a lot less money.(Cough* Sundown Cough*) but if you like Mtx i love it
January 10, 200817 yr Author i really wanna run a sundown 3000d, and its not really that i "like" mtx (ive never used them) im just going by amps that have a single 2 channel big enough for all 16 mids. i know i could run less mids and just go with sundown amps, or use like 2 sundown amps for the mids, but i want a maximum of 3 amps (mids, tweets, sub) and i want all 3 to match 100% same brand and same model line. sundowns 2 ch isnt 1 ohm stable stereo, and not enough power or id deff run that.
January 10, 200817 yr either way im diggin your install need more pics please i wanna see where you intend to put 16mids & tweets... in a Mini now that i think of it MA Audio clames there 2ch amps are 0.5ohm stable... Edited January 10, 200817 yr by Lord Baccus
January 10, 200817 yr Author i really dont like posting pics here becuase everyone just talks chit, i dont care really as im still gonna do it, but the thread will end up locked anyways..but ill post a few pics.this is where 4 mids and 4 tweets will be: (that pod is getting glassed, then covered, there will also be a flush trim panel that covers the gaps on the sides/top, and makes the sub and removable port sit flush)and this is how im gonna do my door panels. dont mind the holes i cut on the bottom, thats how i was originally going to make them (mids along the bottom) and i had to notch the panel so the magnet would go through, to clear the seat, but like always, i changed my mind lol.6 tweets will be above the top row of midsor do you like this better? either way i go, i have to somehow get some sort of handle or something on there that flows good, so you have something to pull the door shut, its a daily driver and dont want to have doors with nothing to pull on to close it lol Edited January 10, 200817 yr by pimpedout97x
January 10, 200817 yr Author either way im diggin your install need more pics please i wanna see where you intend to put 16mids & tweets... in a Mini now that i think of it MA Audio clames there 2ch amps are 0.5ohm stable...i dont want MA audio i had them for my explorer and they dont do rated power at all (their 2chs) and ive got 3 hk4000d's for sale too lol.
January 10, 200817 yr Cool wall dont let the Sq guys rattle your cage i try to learn from everyone... just do what cha do Bro... i think it's Wicked killer install...noone else has 1 like it Edited January 10, 200817 yr by Lord Baccus
January 21, 200817 yr beautiful setup. wall wise, dont know what your doing with the doors, its gonna be interesting to see how that turns out. Ive been considering redoing mine but eeeeehhhhh havent had the energy lol im running a te1501d on a single 15 3.6 tuned to 32 hz and its a great amp. No issues as of yet. run the old school mtxs for some time as well and love em. solid amps that do over power, although the retail pricing is high
January 25, 200817 yr pretty much mirrors the specs of my 1501. i got mine from a member on caraudio forums for 290 just a couple weeks old. even got the info to setup warranty good looking though. When you get a chance could you update us on the door panels. im really interested to see how your gonna do them. I can see the flowing of the speakers, but really at a loss for the handles. both to close and unlock it. cant visualize where thats going. thx
January 25, 200817 yr Author well the handles will be in the same spot, i could actually relocate them to the kick panels if i want to, but im not gonna bother with that.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.