Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

ill let the pics tell the story

P1010561.jpg

P1010562.jpg

P1010563.jpg

P1010564.jpg

P1010565.jpg

P1010566.jpg

P1010567.jpg

P1010568.jpg

P1010569.jpg

P1010570.jpg

P1010571.jpg

P1010572.jpg

Many Thanks too Pierce Audio Products for the Comps :domoslay:

Three-way? Nice, you should go active now with the 9887.

I see a Sundown SAX-100.4 and 100.2 in your future.

  • Author

so far Clean & Clear as far as loud ill have to wait till i get my new SAZ 3000d amp to compair them with the sub playing...

but was noticable clearer in the Mids & Highs as apposed to the Mb Quart mids & highs were straining to keep up.

but remember the Pap has a 6.5mid and the Mb Quart has a 5.25 mid

overall i am enjoying the clean sound reproduction from the Pap comps.

as for 3 way i have the crossovers nessarry to do this now.

am reading on how to go Active with the 9887

  • Author
I always wondered about those PAP components...for 70 bucks they look like they may be worth a shot

i went to lunch today and got a chance to really listen to them and the SQ is really Great.

and i did crank em up too see if there was any differance and the more power i put to them the better they did...

really a solid set of Comps...

  • Author
Hate to tell you this now, but you should really deaden the insides of your doors as well.

6.5 >> 5.25, nice work!

im going to asap...

how do i configure a set of 3way comps ???

do you suggest any special way of wiring the different mids ?

  • Author
need to know what processing you have to configure a 3 way anything.

thats kind of what i was hoping for info on,

can i rub the PPi 300.4

with the active Alpine 9887 -

using the front ch for the tweeters

and the rear ch for the mids / using 3 sets of crossovers ?

where should i mount the 5.25" mids ?

i have the 6.5" mids in the stock locations w/ tweets shown in pics

where should the smaller mids go ?

do you have any pics of a setup likt that or any diagrams ?

im @ least trying to SQ a lil :slayer:

i think im getting old...

Edited by Lord Baccus

"SQL"

rofl

I'd still say stick with 2 way for now, and if you really like the whole Active + SQ realm, then we can help with a gear list.

Usually with a 3-way system you have your tweet (ranging in size from 1"-2"), your midrange(3"-4") and your midbass (often times a 7"-10").

These are just generalizations, there are other sizes people use, but these are the most common.

  • Author
:( :(

5.25's have no place in a 3 way.

Perhaps we should start from scratch and ask what you are trying to do.

im just trying to have something that resembles SQ during the week and on the weekend im an SPL Warrior, i switch boxxs for this...

i have a deadicated Fart boxx

and a 7cf box ported @ 36Hz for music

as allways suggestions are welcome

  • Author
:( :(

5.25's have no place in a 3 way.

Perhaps we should start from scratch and ask what you are trying to do.

im just trying to have something that resembles SQ during the week and on the weekend im an SPL Warrior, i switch boxxs for this...

i have a deadicated Fart boxx

and a 7cf box ported @ 36Hz for music

as allways suggestions are welcome

bump :peepwall::welcomeLW:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.