Posted March 13, 200817 yr What kind of wiring am i going to need, assuming 1/0 gauge?So far i have:SUB: Fi 15" BLAMP: saz-1500ENCLOSURE: 3.8ft^3 @ 32 hzi have no clue how much and what kind of wiring i am going to need.
March 13, 200817 yr How much depends on how much you need. Grab a measuring tape and figure out your path from your front battery to your amp. Buy the amount plus a little extra (2-3ft).1/0awg would be ideal, especially in case you ever upgrade.
March 13, 200817 yr Author How much depends on how much you need. Grab a measuring tape and figure out your path from your front battery to your amp. Buy the amount plus a little extra (2-3ft).1/0awg would be ideal, especially in case you ever upgrade.Thanks that makes sense. The guys at this local shop will install everything for around 180.00... should i give it a try or just pay them to do it? i might stick to the safe side and let them do it. Only problem is they don't have any 1/0 gauge wire at this shop he said i'll have to buy it myself What other kinds of wires/fuses would be sufficient for this setup?
March 13, 200817 yr Wire = wire in most cases.Weldingsupply.com can outfit you with 1/0awg. You'll also need an ANL fuse holder and 250A fuse.I wouldn't pay a shop to run wire. Its not hard.
March 14, 200817 yr Author So i just found a ANL fuse holder w/ 250A fuse. All i need is the wireany other (recommended) websites that carry good wire?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.