Posted April 10, 200817 yr Finally picked up a few sheets of MDF to play with to make my explorer box, what should the minimum port area be for 2 15inch RE SX's? So far i have messed around with the RE box tool and came up with a 6.1 Cube box tuned to 34.7hz with a port area of 74square inches. My available measurements seem to be 41 inches wide(before wheel well bumps), 18 inches deep, and i don't want to reach over 20 inches high on the height. If anyone can throw some suggestions at me for the area of port needed or maybe a box design they have used in their explorer it would be much appreciated. Thanks!
April 10, 200817 yr My only suggesion is upping your port area to 16sq inches of port per cubic foot (ie. 6.1 cubic feet and 98 sq. inches of port)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.