so i have another question ok here it go's. so im gonna be running 2 3000Ds to 2 Fi Btls would it be better to strap the amps together or run each amp unstraped 1 amp to each speaker sepretly?

You'll have to test both ways and see which gets louder for you.

For ease of tuning I would say go strapped. All the gain, crossover and subsonic controls come from one amp. (master)

That's the way I have my 1000D's hooked up, with a chunk of 8g bridging the two and a tiny (mono) RCA for the signal.

Apparently the ams will put out more power wired individually, but I've heard the difference is indistinguishable. Worth a shot if its easy to wire this way I suppose.

If there running in there own chamber, running a amp on each is fine.

But if there in the same chamber, this could be bad cause one maybe working harder than the other.

STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED

FTW

STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED STRAPPED

FTW

lol i guess you vote strapped

If there running in there own chamber, running a amp on each is fine.

But if there in the same chamber, this could be bad cause one maybe working harder than the other.

there in the same chamber speparated by the port but both sides do connect so yeah its just one big box slot port in the middle of the 2 subs what would be the best way to wire them if i where to strap the amps and if straped i would need to wire the 2 for a 2ohm load correct? 1ohm per amp.