Just like the title says, what is the "best" port area for a 12" H2?

Box is going to be 2.5 cubes tuned to 32 hz. Running off a bx1500d.

For SQ I try to be right around 20-25% of the overall cone area. That usually takes care of all the worries of port noise. So in this case I would use roughly 25-30 sq inches give or take.

Here is a site that helps a little bit also.

http://www.carstereo.com/help2/Articles.cfm?id=31

For SQ I try to be right around 20-25% of the overall cone area. That usually takes care of all the worries of port noise. So in this case I would use roughly 25-30 sq inches give or take.

Here is a site that helps a little bit also.

http://www.carstereo.com/help2/Articles.cfm?id=31

nice link petey......put into favorites so i can link it to ppl who ask that question...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Your welcome

Your welcome

hehe

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee