Posted May 30, 200817 yr hey guysi need some help here i have been runnin all over the web trying to find a proper distro block but it seems very hard to find the one im lookin forso here is what im lookin for a 2 way distrowith 1/0 inputand a 1/0 outputand a 4awg outputand can be fused to 300 ampsthanks
May 30, 200817 yr Author i think this one will workhttp://www.autotoys.com/x/product.php?productid=2743
May 31, 200817 yr The one you linked will work, but it uses the same type connections as the KnuKonceptz blocks that are a total PITA to work with.
May 31, 200817 yr it doesnt have a 4Ga output though... search around more and you should be able to find a 1 in 2out.... Some of them even have insert so you can choose 1Ga, or 4Ga
May 31, 200817 yr Author just get one with 2 1/0 gauge outputs, the 4 will fit in just finethat was the plan
May 31, 200817 yr Author The one you linked will work, but it uses the same type connections as the KnuKonceptz blocks that are a total PITA to work with.what was such a PITA?i have 2 knu distros right now didnt have to much trouble with thembesides not haveing some wire cutters and cutting the 4awg with my pocket knife loldeath to the scearaed
May 31, 200817 yr just get one with 2 1/0 gauge outputs, the 4 will fit in just finethat was the plan checked darvex.com?
May 31, 200817 yr Author just did the one i found was the only one sutible for my applicationthe knu ones would work but the fuses are too small
May 31, 200817 yr The one you linked will work, but it uses the same type connections as the KnuKonceptz blocks that are a total PITA to work with.what was such a PITA?i have 2 knu distros right now didnt have to much trouble with themGetting the compression fittings threaded straight was a pain, but getting them tightened down to where they wouldn't come loose was almost impossible.
May 31, 200817 yr The one you linked will work, but it uses the same type connections as the KnuKonceptz blocks that are a total PITA to work with.what was such a PITA?i have 2 knu distros right now didnt have to much trouble with themGetting the compression fittings threaded straight was a pain, but getting them tightened down to where they wouldn't come loose was almost impossible.Oh my god!You aren't lyin!I have their Konfused battery terminals... I already crossthreaded one battery terminal insert because of their impossibility.The idea is a good one, but unless you have 2 hrs of patience, it's ridiculous to the HIGHEST level.It took me just over 2hrs to install the positive terminal on my starting battery. That is just stupid.They better not come loose either.I liked everyone else's terminal's where they're held in by screws but couldnt find any that could accept minimum of 3 2/0 wires.
June 2, 200817 yr Author ya i think i may have cross threaded my distros on one and i tighted one fittin to much and bent it and it looked like an oval lolbut have had no problems as of yet loland i will be gettin rid of the 3way block once this one comes in if somebody well send me a few bucks for it
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.