http://cgi.ebay.com/ebaymotors/2-INCHES-52...t=1218868531562

i need to know if i can make this work....

reason is....... when i idle up with the music on i have no idea where my rpms are... you cant hear the car with the music up and you cant feel the motor.

also open to any tachs that may be better... or cleaner.. or even smaller. thanks ssa.

I believe MSD makes a box that will provide a tach signal with a couple wire hook-ups, but your car should be new enough to have a tach wire in the PCM

http://www.fordf150.net/articles/idx.php/0...-Ford-F150.html

bingo, u just gotta figure out which wire it is on the pcm

good lookin out boss.... hows that navi coming.

its runnin im takin it slow, lol

alot alot of work, more headache than anything....

I'm not drivin it much cuz i dont have the title for it seems i have to get my grandparents to somehow get another title from Louisiana before i can even get insurance soo, it basiclly still stitting, and i come along a fix some things here and there.. next step is ball joints and upper control arm, then i need an alighnment, lol...after that i think ima be pretty solid though, just gettin the major stuff out the way.

http://www.the12volt.com/installbay/vehicl...rd/Lincoln.html

looks like it skips a couple yrs but, the 98 says it white/pink

i have remote start... and it has a wire going to number 5 coil. weird. this site says it should be on number 1

wait #5 coil or wire?

i thought it was only 2 coils, 4 on each side

or

for the sensor that checks to see if the car is on? basiclly the one u wrap around the spark plug wires?

i dont think it really matters

i have 8 coils.

just tap into the wire thats connected to the remote start.

its a tach signal, just be sure to setup the gauge accordingly

I know I'm bumping a oldish thread but you can buy a tachometer with an inductive pickup for distributorless vehicles.