Posted September 6, 200817 yr Well heres the plan.Thats the rear window in my cab.thats the front window in the fiberglass camper shell...I plan to take out both windows and run a gasket between the two. I've heard that you use some kinda RV gasket... what is it called?As far as I know I'm going with two IXL-12s and a 2500D. Would 3/4 MDF be thick enough (Rona has no 1").. I didn't check any other stores.
September 6, 200817 yr Author Heres what I want to do, from Cardomain...Just better subwoofers and stuff.http://www.cardomain.com/ride/331505/3
September 7, 200817 yr Author I honestly don't know what I will use for sub(s)/amp(s)....its up in the air right now..
September 8, 200817 yr with space like that your better off spending money on some large low power subs, like 4 mj18m's and a single saz 3000d or 2 and a saz1500 depending on budget or you could even try out the new sae-1200d. a sae-1200d and 2 mj18's is only $660 a large low tuned box and you would have a serious daily ground pounder.
September 8, 200817 yr Author I was kinda thinkin 4 of those MJM-18s and that Orion 2500D...My box guy don't really like the MJMs...I'm so confused to be honest. If I knew how do design a box I'd do a box that would lay flat like those pics, 4 18s in a ported box, and just put a baffle over top the box like in that pic and seal it to the truck... done... but I was told by somebody on SMD that it might turn into a bandpass by accident or something and mess with tuning... argggggh.,....
September 8, 200817 yr never mind the mj's are only single 4ohm you would need to get an ampthat puts 12-1400w at 2ohm like a kicker zx1500.1 of ebay for $400
September 8, 200817 yr Author never mind the mj's are only single 4ohm you would need to get an ampthat puts 12-1400w at 2ohm like a kicker zx1500.1 of ebay for $400The Orion 2500D puts out 2500W @ 1 ohm.... so 4 SVC4 subs = 1ohm....
September 8, 200817 yr I was kinda thinkin 4 of those MJM-18s and that Orion 2500D...My box guy don't really like the MJMs...I'm so confused to be honest. If I knew how do design a box I'd do a box that would lay flat like those pics, 4 18s in a ported box, and just put a baffle over top the box like in that pic and seal it to the truck... done... but I was told by somebody on SMD that it might turn into a bandpass by accident or something and mess with tuning... argggggh.,....a box wouldnt be hard to design a box and 4 18's would be sick on a 2500d. do you have a 2500d already if so that helps money a lot? put the cap on and see how far from the bed floor to bottom of the window is and go from there if you want help let me know.
September 8, 200817 yr Author I was kinda thinkin 4 of those MJM-18s and that Orion 2500D...My box guy don't really like the MJMs...I'm so confused to be honest. If I knew how do design a box I'd do a box that would lay flat like those pics, 4 18s in a ported box, and just put a baffle over top the box like in that pic and seal it to the truck... done... but I was told by somebody on SMD that it might turn into a bandpass by accident or something and mess with tuning... argggggh.,....a box wouldnt be hard to design a box and 4 18's would be sick on a 2500d. do you have a 2500d already if so that helps money a lot? put the cap on and see how far from the bed floor to bottom of the window is and go from there if you want help let me know.No I don't have the 2500D but I can get a pretty decent deal on it...I can get a pretty good idea of how much space there will be from the floor to the window with the cap off. There should be tons of room there for the MJMs, the box can take up the whole space of the bed.. I don't care.
September 8, 200817 yr you should have no problem with 4 mj's then about a 25cu box tuned to 28hz would do nice
September 8, 200817 yr Author you should have no problem with 4 mj's then about a 25cu box tuned to 28hz would do niceI'll measure the space when I get home.I seen a vid of 3 MJ-18s on a SAZ-1500D on youtube... looked pretty crazy... actually hang on now....... about 1 minute later... Says it does a 146.4 If I could get close or surpass that with four in my truck I'd definitely be happy...
September 8, 200817 yr low 140's is nice mid to high 140's would be sick considering it will also be a lowend beast good luck stopping all the rattles
September 8, 200817 yr Author low 140's is nice mid to high 140's would be sick considering it will also be a lowend beast good luck stopping all the rattlesHopefully since my trucks a reg cab theres not much to rattle...I can't measure the bed right now cause all the body parts for it are in the back.
September 16, 200816 yr That's what I used the couple times I have done blow throughs. It's called accordian boot
September 17, 200816 yr sibscribed..this should be fun and not tooo hard.considder using 1" acrylic and bolt it to the back part of that box so that you don loose all sight to the rear.my 0.02 cents ...have fun
December 16, 200816 yr so whats happenning? im not lettting you of that easy... whats the update on matters?more pics or FAIL
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.