Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

Not sure if this is the correct place to post...if not, mods, feel free to move!

I recently installed a HU for a friend. She has a 1989 Ford Taurus. When she bought the car, the front speakers didn't work. I replaced the speakers last spring, and that did not fix the problem.

This past weekend, I installed a Pioneer HU, hoping that would correct the issue. But, no, it did not.

So I am wondering...could I just splice new speaker wire into the Pioneer side of the harness, and basically run new wires to the speakers? In doing this, I would bypass the factory wiring, hopefully solving the problem.

But, if I bypass the factory wiring, won't I also bypass factory ground? Or does the HU provide a sufficient ground for the speakers? I figure if necessary I could just ground the speakers somewhere in the door, and just run new power wires from the harness.

Sorry for the long-winded explanation, but I wanted to be as clear as I could be. I am going to try to fix this issue this coming weekend. I have asked this question on another forum, with no real results. Hoping you guys can help me out!

Thanks!

geo

no no whoa..

just run new wires from the door speakers to the head unit... no need for a new ground but it never hurts either...

dont ground the speakers to the doors.... a speaker works off AC power not DC.

but you may have another issue does the car have a ford premium sound system in it?

if so your problem may be that you need a factory amp by pass.

  • Author

No, the car does not have a premium sound system. Just basic factory HU and speakers. Also, when I installed the HU, the rear speakers still work fine. Just the fronts do not work at all. Thus my diagnosis of a wiring issue somewhere.

I was under the assumption that the speakers pick up ground via the factory harness, which is in turn grounded to the frame/uni-body...etc.

So I don't have to worry about making new grounds? Just pull a new set of wires, and I should be good to go?

Thanks again!

geo

Edited by geowick07

sounds like you may be talking about an old common ground radio....

no just a new + and - for each front speakers.... run them in to what should be the grey and white wires on the head unit.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.