Posted February 5, 200916 yr We shopped for a Buick Rendezvous or Pontiac Aztac so we could get >18 cubes and still have room for kids, grocieries and such and avoid getting a minivan. Explorers, Blasers, Bravadas, and the like we'ren't nearly enough.Basically we are walling the hatchback. >20 cubes, 8" port. This is temporary until a 21" or 22" driver of similar specs is finished. ( >30mm Xmax, <20Hz Fs)I originally designed it to have the sub on top and port on bottom, but once the 22" is in, side by side works better.
February 5, 200916 yr Wow that pics is weird, gives the illusion that those speakers in the background are very tiny
February 5, 200916 yr Author Lookin good thanks, I hope it looks good finished... plain black 22", 8" port, black wall... in cognito on the down low, yet WTF! at the same time these might be redundant from an earlier thread, but they go here now:a little aqward free air 16Hz or 20Hz bass i love you free air aprox 4.5 - 18 watts according to DMM... demo just to show 7Hz signal is lowest, not 18Hz in that track DMM showing 5.7 volts during 7Hz tone, 6x6=36 watts/2 ohm= 18 watts no more than 12 watts DMM
February 5, 200916 yr Author Wow that pics is weird, gives the illusion that those speakers in the background are very tinycompared to that 18", they are can't wate to see how the 22" dwarfs things...
February 5, 200916 yr What ever happened to those enclosures for the dash ? Wanna sell me a pair of Extremis ? Curious to see this build
February 5, 200916 yr Author What ever happened to those enclosures for the dash ? Wanna sell me a pair of Extremis ? Curious to see this buildthese ones??as you can see, I had a very rough time with it... was my first build with angles like that that couldn't be measured twice and cut once... it was measure, cut, test fit, trim, test fit, trim again... re-angle, adjust, angle up a little higher, cut again..... I learned a lot from it, still have it, breaks my heart to waste it I'm puttn the extremis in the doors, but I'll sell the Audio Control 6XS! Edited February 5, 200916 yr by kryptonitewhite
February 5, 200916 yr Author Gotta love bass to drive such an ugly car Lookin good ever since sitting on the inside, it's been growing on me. it's like being inside the spaceships in starwars! warp speed... 20Hz... ahead!!
February 5, 200916 yr Author Looking good for your first build..definately not my 1st build.. or 10th...
February 5, 200916 yr Thats F*%KING sick thats going to be one hell of a clean ride. Looking forward to seeing more pics
February 6, 200916 yr Author Thats F*%KING sick thats going to be one hell of a clean ride. Looking forward to seeing more picsthanks I hope to keep as much enthusiasm as you!
February 6, 200916 yr Author Got some 8" sonotube. My piece is actually 7 3/4", they make 3 sizes of "8 inch" for shipping purposes.
February 6, 200916 yr Looking good for your first build..definately not my 1st build.. or 10th...My bad..Looking good for your first build with angles like that..
February 6, 200916 yr Author Looking good for your first build..definately not my 1st build.. or 10th...My bad..Looking good for your first build with angles like that.. it's the only excuse I have for it looking so bad, and it really was tough.... I was making my 1st and only attempt to point and aim, do some staging and imaging.... man was it a mess. But thanks Edited February 6, 200916 yr by kryptonitewhite
February 8, 200916 yr Author As of yet, every box I have built was constructed out of car. This one is going to be along these lines, and I am struggling with caulk/glue and screw. I am OCD and anal when it comes to this.... so I am hoping for a bunch of links with different pics like these showing how best to put front/back/top/sides together securely. I'm hoping I don't just glue/caulk the hell out of it and set them together.... I am used to flush ands butted up together and putting 2 1/2" screws in.... but when it's the entire height/width/depth, you can't get in there to drill.Any help is greatly appreciated!found these pics on the net, not mine:
February 8, 200916 yr Author I'm not so sure about driving screws strait into the sheetmetal, nor will I use any 2x6 or 2x4... but here's something a bit off course
February 8, 200916 yr dude this is such a sick build log!! 1st off I must say your killing your kid with that sonotube HAHAH, jk. and thats awesome getting the wifey to lend a hand, thats pure evill i meann geniuss ha, keep up the amazn work, i must say though, not a big fan of pontiac torrents? i believe thats wut those are called
February 10, 200916 yr Author I like the wall.been trying to build one for 4 years now, well here it is!
February 10, 200916 yr Author dude this is such a sick build log!! 1st off I must say your killing your kid with that sonotube HAHAH, jk. and thats awesome getting the wifey to lend a hand, thats pure evill i meann geniuss ha, keep up the amazn work, i must say though, not a big fan of pontiac torrents? i believe thats wut those are calledthanks man! it's an Aztec/Aztek lol I see it both ways when searching parts...craziness...
February 10, 200916 yr Author so I couldn't wait anymore, I decided to use the wood I have to build a quick box to get us through so we could take our time and do the final box as good as we can. so we re-took some measurements so we could build as big as we could outside and slide it in. I didn't calculate anything, just got the max dimensions and made the port go all the way back less 1 port diameter.... I just did it and what a trip, it's right where we were aiming for anyway... we might just keep this box as is unless we do get a 22".... I put the port close to the sub to get more wall clearance, making this box obsolete for a 22"...cuz it is ... was... just a temp sloppy box to get by... well check this, I was aiming for >20 cubes and 15Hz tuning.... and now that I sat down, we have 22 cubes @ 15Hz with a 20" port length. What are the freakin odds?!I'm keepin it as is. Now the big debate may as well start now, so after I post these pics here ( camera died, I have to go out and take more pics now that we're home... box basically complete in-car....)After this post I'll post my plans I made 2 weeks ago... showing we are on target as is :Dtaking out factoryconsidering leaving factory in and putting CD deck in center consolelooks goodthe driver side power window has been intermitten... switch is going bad... decided to pull the door apart too to replace switch and see what we're working with to put 2 Extremis 6.4's in each door... fiberglass/bondothank god ya can't see my measurements, cuts, or close ups of the final outcome... I was in a hurry to get something in by the end of the dayfreezing rain and windy all dayfront... close to wall/baffle size to get an idea of what the wall will be likeblurry... shows how close we are, taking up just about everything we canbottom toomy sausages stickin out... i liked sitting inside the box when it was complete too
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.