Posted February 20, 200916 yr Are these any good? the amp I'm getting, an AQ2200d requires a 200 amp fuse, and im using 2/0 welding cable so i figure il ljust get five, best bang for my buck and in case any pop i'll have an extrahttp://cgi.ebay.com/Tsunami-200-Amp-ANL-Fu...bayphotohostingAnd for a fuse block/holder, should I use the typical screw down the cable, or should I get the ones that you use a wire terminal on each end and just touch the fuse together? Have any suggestions on some? I need 2 affordable ones, but 3 if they are REALLY affordable.. I'm not trying to cheap out, but I just don't think its necessary to spend 75$ on three fuses...(since I'm using 2/0 thats why I'm wondering because most are 0 guage fuse holders) Edited February 20, 200916 yr by rumproast789
February 20, 200916 yr Author tsunami has been a good brand in my past for electricalsounds good, how bout fuses for wire bigger than 0 guage?
February 20, 200916 yr Should be fine with your wire size.Tsunami = Reputable company and quality products
February 20, 200916 yr Author Should be fine with your wire size.Tsunami = Reputable company and quality productsAlright, I think I'm just going to order these then..Should I step it up to 250 amp or no?lol I still need help with some fuse holders!! Help a kid out
February 20, 200916 yr Should be fine with your wire size.Tsunami = Reputable company and quality productsAlright, I think I'm just going to order these then..Should I step it up to 250 amp or no?lol I still need help with some fuse holders!! Help a kid outSnoop on eBay some more gotta be something on there for fuse blocks. Most are for 1/0 so you may just need to strip your wire down to fit the 1/0 gauge fuse blocks.
February 20, 200916 yr Author Should be fine with your wire size.Tsunami = Reputable company and quality productsAlright, I think I'm just going to order these then..Should I step it up to 250 amp or no?lol I still need help with some fuse holders!! Help a kid outSnoop on eBay some more gotta be something on there for fuse blocks. Most are for 1/0 so you may just need to strip your wire down to fit the 1/0 gauge fuse blocks.Thats what I was thinking, but won't it really mess up the current flow?
February 20, 200916 yr Author Nope. Such a small area will be trimmed down.I found some trustworthy ones,DB Linkhttp://cgi.ebay.com/IN-LINE-ANL-FUSE-HOLDE...DefaultDomain_0I hope those will fit my fuses, I'll just order one then order another later to make sure it fits, or should i jsut order both
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.