April 15, 200916 yr Author * 2 Channel Mosfet Bridgeable Amplifier with built in Crossover * Maximum power output @ 2 Ohm 800W x 2CH = 1600W * LPF (low pass filter) variable & HPF (high pass filter) variable * High and low adjustable level input * Mosfet DC-DC switching power supply & LED indicated power status * Built-in protection against short circuit and high temp * Tri-mode speaker connection ready & Bass boost (0db-18db) * Auto power on/off by remote (+12V) * Dimension (W x H x D) mm: 287 x 64 x 429 * Chrome Heatsink * All measurements done at: 14.4V DC, 1KHz input signal i got that from the actuall website @ http://www.dieselaudio.com/element_amplifiers.htmli believe that website i gave you up there is wrong mabye
April 15, 200916 yr Author so im not pushing my subs at the right rating? well i cant really do anything about that now until i get some more money for a amp in the long run, so will it still be bangin
April 15, 200916 yr * 2 Channel Mosfet Bridgeable Amplifier with built in Crossover * Maximum power output @ 2 Ohm 800W x 2CH = 1600W * LPF (low pass filter) variable & HPF (high pass filter) variable * High and low adjustable level input * Mosfet DC-DC switching power supply & LED indicated power status * Built-in protection against short circuit and high temp * Tri-mode speaker connection ready & Bass boost (0db-18db) * Auto power on/off by remote (+12V) * Dimension (W x H x D) mm: 287 x 64 x 429 * Chrome Heatsink * All measurements done at: 14.4V DC, 1KHz input signal i got that from the actuall website @ http://www.dieselaudio.com/element_amplifiers.htmli believe that website i gave you up there is wrong mabye
April 15, 200916 yr Author ok since you said it will run around 320 per sub. what about this amp?http://cgi.ebay.com/ROCKFORD-FOSGATE-RF-X7...1713.m153.l1262will it run at full power to the subs?
April 15, 200916 yr Still hard to answer your question as it is completely subjective. Meaning: What I consider "beating" and you probably do are two completely different things. You will have bass with that setup. Will it make your vision blurry? Probably not.
April 15, 200916 yr That amp will work. If you get that amp, get two D2 subs and wire them at a 2ohm load. Assuming it does rated power, it will be a perfect match for 2 Fi SSD's.
April 15, 200916 yr I think you should really put off buying ANYTHING and go read up A LOT. No offense We all were noobs at one time lol!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.