Take a look at these specs and tell me what you think. It's a 10 inch woofer, xmax is alomst 25 mm, and weighs about 36 pounds

looks foreign me. =)

looks foreign me. =)

Is that a good or a bad thing?

It also has a XBL^2 motor

neither, dont know enough about T/S parameters to comment.

Quentin, sent you a pm.

it looks good so far. i cant really read ts parameters, but low fs high x max,x mech is always nice.what are you lookin at for power handling. hell put a cool lookin backet and cone on it and i bet it will sell in the shop

These are some of the specs. This is a 10 inch driver

Former Dia: mm 2.953

Wire dia: mm 0.024 in

Former Thickness: 0.1 mm

Layers: 4

Wind Length: 28.786 mm 1.133 in

Offset: -30.231 mm

Surface Area 7959 mm

Very specific. Looks good to me. Pretty good for a 10". Nice Qts. and motor strength.... xmax is good too. I'd try it out.

This will be a low line. Running a 10, 12, and 15. I will have prototypes in a couple weeks. We are also designing a 15 and 21 right now with a goal of high 60mm's to low 70mm's xmax at 15% THD. They will be groundpounders with a FS around 18hz. Very musical with retarted amounts of output.