Was wondering if anyone has delt with "THE ROBOT UNDERGROUND" aka Juicyrobot on ebay?

This is my question//

I have a Orion XTRPRO 2400d that 1 of the output conductors was smoked. I spoke to Chris from db-r and he told me that i had to find another board from that model to get the part i needed. So i remember that when DEI bought Orion/ppi/ads in 2003 they had a auction and "the robotunderground" bought allot of the stock parts/b-stock items. I contacted them and was told to send it in for repair and they would rewind the conductor. I sent it to them on the 13th of may and they emailed me and said they received it and the tech is looking at it. Now i have emailed them 4 times and asked for their # and the techs name and keep getting the same reply (haven't herd from the tech about it yet). Any ideas on what i should do?? Its bin almost a month.

Joe

Are they the same people trying to sell the Adire site?

Are they the same people trying to sell the Adire site?

Those are the ones, I would stay away from them

Yep. I saw that awhile back for i think 80k for almost everything.

Joe

The bad part is i don't have a name or phone# for them just a email address with an A** hole on the other end replying.

What awesome customer service they have

I think my 9 year old daughter could word their emails better.

I have never done business w/them, but here's another thread about the company... it's long! Robot Underground on DIYMA

I have never done business w/them, but here's another thread about the company... it's long! Robot Underground on DIYMA

Wow if i had seen this before i would of never sent it to him.

Thanks

Posts some pics of that output 'conductor'.

there's a really long thread about them in DIY if you can dig it up.

there's a really long thread about them in DIY if you can dig it up.

This one?

http://www.diymobileaudio.com/forum/sales-...nderground.html

there's a really long thread about them in DIY if you can dig it up.

This one?

http://www.diymobileaudio.com/forum/sales-...nderground.html

yup, 18 pages of warnings lol

That should tell you what you need to know.

there's a really long thread about them in DIY if you can dig it up.

Like the one posted 3 posts up? LOL

there's a really long thread about them in DIY if you can dig it up.

Like the one posted 3 posts up? LOL

ahhh yah. Exactly what I said.

Good luck seeing your amp again my friend. I heard about them quite a few times. Do not do business with them.

How come when i try to post a picture of the fried amp i keep getting this message.

THE FOLLOWING ERROR(S) WERE FOUND

You have entered a link to a website that the administrator does not allow links to

The picture is from photo bucket the same as i always use?

Well if you want to see it theirs the link/image code for it.

http://i636.photobucket.com/albums/uu88/jj1479/100_1688.jpg

Edited June 12, 200916 yr by jj1479

it's becuase it's a dynamic address. Don't worry to much about it, most people outside of web designers don't know what that means.

Well if you want to see it theirs the link/image code for it.

http://i636.photobucket.com/albums/uu88/jj1479/100_1688.jpg

Look for alternator / electric motor repair places. They should have the correct wire and the skills to repair it. Simple fix IMO.

Never saw such damage before (not counting my melted amp..)

Well if you want to see it theirs the link/image code for it.

http://i636.photobucket.com/albums/uu88/jj1479/100_1688.jpg

Look for alternator / electric motor repair places. They should have the correct wire and the skills to repair it. Simple fix IMO.

Never saw such damage before (not counting my melted amp..)

Ya and the guy that i bought it off of said that it works fine no problems at all. And he never smelt anything like it frying so it was fine when he had it.

there's a really long thread about them in DIY if you can dig it up.

This one?

http://www.diymobileaudio.com/forum/sales-...nderground.html

yup, 18 pages of warnings lol

That should tell you what you need to know.

I just read the first page of the diy robot underground thread, it seems like the guys a dick head, but for the MOST part he's legit to deal with.

I'd never deal with them, if there's any doubt on a sale imo, don't go through with it.

Well i just received this email from them. And look its more than 3 words!!

"Our guy works out of his house, if he can fix it, it'd only be $120. Still waiting to hear back from him.

I know, I know.. You guys are bass addicts. If you could strap the sub do your chest you would.. ;-) Have a good weekend.

JuicyRobot is part of the Underground Industries family of brands. RU Ready for The Revolution? - www.Worldwide-Revolution..org/LOOSERS/RETARDS/RIPOFFS

Sounds alittle deceiving when they told me that it COULD be fixed. And its only bin well a month.

Well guys i will see in about 5-7 days what kind of work that they do. I received an email to today that my amp has bin fixed and the total is $185 with a new set of power/ground/speaker plugs. I'll have to open her up and see what she looks like.

And yes i will post pictures

I can't wait to see how it compairs to my crossfire.

Edited June 16, 200916 yr by jj1479

$185...i think its a bit much

Ya especially if it was so easy to just rewind the inductor. But i guess thats what i get for not really looking around for someone else to fix.

owell i might just sell it and my crossfire and buy a used sundown 3000d.

Post some close-ups of the fix. I'm curios to see it.

From what I can tell that amp is rather similar to my viper d2500.1 and the inductors have a habit of running hot. Nothing you can do about it either.