How do you guys do it and still get the door sills back down?

That wire is so thick I cant get the plastic sills to snap back in.

Also for those of you running the amp behind the rear seat how big is the amp?

I have a sundown 1200 v2 and Im starting to wonder if its too big to fit back there. I cut out the rubber to fit the amp in but Im wondering if when I put the seat back in if it wont fit.

Id like to know before getting it all done.

Run the wire under the truck. i have 3 runs of 1/0 cable in a sleeve running along the top of my frame rail on the passenger side coming up through a hole in the floor behind my back seat.

Im running a SAZ1500d and a SAX125.2 behind my seat. check the build log. maybe that will help. mounting the amps is pretty tricky.

i had 4 runs of 0ga in my S15 but i didnt run mine the way you are thinking, i ran mine threw the passenger side firewall and the under the carpet all the way to the back corner.. sliced an X and pulled the wires out from there... you couldnt tell/see/feel a hump where the wires where cause i cut an inch wide of foam out for each wire and just like "popped em in place" where the foam was cut out... ya feel me?

Run the wire under the truck. i have 3 runs of 1/0 cable in a sleeve running along the top of my frame rail on the passenger side coming up through a hole in the floor behind my back seat.

Im running a SAZ1500d and a SAX125.2 behind my seat. check the build log. maybe that will help. mounting the amps is pretty tricky.

Ok Ill check out your build thread, I forgot about your thread.

Does it show where you are running the power wire and where it comes back in the truck?

i had 4 runs of 0ga in my S15 but i didnt run mine the way you are thinking, i ran mine threw the passenger side firewall and the under the carpet all the way to the back corner.. sliced an X and pulled the wires out from there... you couldnt tell/see/feel a hump where the wires where cause i cut an inch wide of foam out for each wire and just like "popped em in place" where the foam was cut out... ya feel me?

A little different situation with our trucks. 1 run of 4 ga is about all you can fit here

i had 4 runs of 0ga in my S15 but i didnt run mine the way you are thinking, i ran mine threw the passenger side firewall and the under the carpet all the way to the back corner.. sliced an X and pulled the wires out from there... you couldnt tell/see/feel a hump where the wires where cause i cut an inch wide of foam out for each wire and just like "popped em in place" where the foam was cut out... ya feel me?

A little different situation with our trucks. 1 run of 4 ga is about all you can fit here

I checked out your thread and saw your battery is on the passenger side. I have dual batteries and Im using the driver side one, I wonder if it matters which battery I go off of?

Thats a good question. i would pull power from which ever is closest in line to your amp. ill be doing three batteries under the hood soon. i built a custon dual inlet intake that opens up a third spot where the factory air box sat