You gave me a quote on a 12"xcon box sent to my house.Now ive been thinking about trying to do the 15". The space available is 36"w x16"h x 18" d sub up port back . Can you make a box to fit that and give me as close to the 4cubes needed and tune it to 32hz. Can go a little bit more on the height and depth if needed.

Can go a little bit more on the height and depth if needed.

Better go measure that little bit, you are going to need it.

Is this not 6 cubic feet with these measurements before displacement of sub and port???? I do believe that it can be done and i'm sure someone else will give there 2 cents and say so...

Is this not 6 cubic feet with these measurements before displacement of sub and port???? I do believe that it can be done and i'm sure someone else will give there 2 cents and say so...

Seriously?

Sorry, Sir-Lancelot is right and I'm wrong.. That is only 4.777 if your using .75 wood before diplacement of port and sub.... Don't know why I got 6 the first time.. So yea will need to do some more measuring to get that 4 cubes...

Edited March 23, 201015 yr by thehawk93

I see ssa has the min at 3.2 and optimum at 4cubes as long as im above the min on the box im happy. And i can give up about 1 to 2 inches more in depth. Or if not I guess I'll have to stick with the 12". Just trying to do the 15" so i dont loose so much in cone area, im replacing 2 10's. on a second question im taking out 2 10" pioneer spl subs on 800w to get the xcon on 1400w. what would my output be compared between the pioneers and the single 12 or 15 xcon?

Well, no one can be sure in this area as no one's application is the same... But you can run a 12 in the right box and get very loud...

A 12" in the optimum enclosure must be loud as f...

It can leave you some room in your cargo area to give the amps some fresh air !

I run a 15" xcon in a 3.5 cu ft net ported box. I love it, but I bought the 15" only because I already had the box for the 15". I would have bought the 12" instead!!!