I have the 12" SSA Xcon D1, What is the Displacement of this sub? I would guess it's 0.18 or 0.19cuft?

Take a look!! It's a work of Art...

Did you check the specs on the site? Im positive its there.

Nice breakdown there too. Cool pics.

Did you make those breakdown pics or find them on the website somewhere? If you made them, good job, they look great.

Did you make those breakdown pics or find them on the website somewhere? If you made them, good job, they look great.

Nope I didn't fined them, I Made it using Google SketchUp 7. I'm going to remake the hole thing, I forgotten a few things.

Edited April 12, 201015 yr by Snooze

Displacement: 0.17 cu.ft.

http://www.soundsolutionsaudio.com/store/products/12%22-SSA-XCON-D1%7B47%7DD2.html

XCON 12D2/D1

3" wide, 4 layer, Aluminum coils

Push terminals

Pulp Fiber Cone

5 progressive spiders

Custom FEA optimized motor

Aluminum Shorting Ring

3" Anodized alum. former

Triple Sandwiched Leads

Hand crafted in USA

Wattage: 1750wRMS

Specifications:

12" SSA XCON D2

Re 3.7 Ohms (1.85 per coil wired in series)

Fs 32.4 Hz

Qms 5.24

Qes .39

Qts .37

Mms 222

Vas 35 l

Sd 480 cm^2

BL 20.65

SPL 86.7 1 W/1m

Xmax 31mm

Enclosure Recommendations:

Sealed: .9 - 1.25 cu.ft.

Sealed: 1.35 - 1.5 cu.ft. optimal

Ported: 1.75 - 2.25 cu.ft. @ 26-33hz

Ported: 2.5 - 2.75 cu.ft. @ 26-33hz opt.

Sub Outside Dia.: 12.500”

Cut Inside Dia.: 11.150”

Displacement: 0.17 cu.ft.

Edited April 12, 201015 yr by BanginGMC

12" SSA XCON D2

Re 3.7 Ohms (1.85 per coil wired in series)

Fs 32.4 Hz

Qms 5.24

Qes .39

Qts .37

Mms 222

Vas 35 l

Sd 480 cm^2

BL 20.65

SPL 86.7 1 W/1m

Xmax 31mm

Enclosure Recommendations:

Sealed: .9 - 1.25 cu.ft.

Sealed: 1.35 - 1.5 cu.ft. optimal

Ported: 1.75 - 2.25 cu.ft. @ 26-33hz

Ported: 2.5 - 2.75 cu.ft. @ 26-33hz opt.

Sub Outside Dia.: 12.500”

Cut Inside Dia.: 11.150”

Displacement: 0.17 cu.ft.

ok, BTY the Sub Outside Dia is 12.750” with Rubber seal on.

Edited April 12, 201015 yr by Snooze