Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

Everything was working perfectly til yesturday when I took out my batterys ground and added another ground wire, when I turned the car back on my voltage gauge and both amps powered up but the HU didn't light up at all and started beeping really fast for the first few seconds then stopped, I hit the reset button on the HU and now nothing powers up (HU, amps, voltage gauge)...I checked both fuses on the amp (1 fuse on red power wire, 1 glass fuse on yellow "back up" wire) both were replaced and I've checked the necessary fuses in the interior fuse box with no luck...

I've already emailed eclipse with no response in 3 days Im guessing that because they shut down all US operations...but I just had an autopage alarm installed about a week before this happened and FYI I have disconnected my battery countless times before with no problems so I don't think this is a eclipse security measure

take a small piece of wire and connect it into the power insert on your amp.

Take the other end and touch and hold it inside the remote insert. This will temporarily "jump start" your amp to see if the remote line needs attention.

If your amp comes on, then the headunit needs attention.

Curious as to how the voltmeter gauge is wired up. Where does it connect to?

Everything was working perfectly til yesturday when I took out my batterys ground and added another ground wire, when I turned the car back on my voltage gauge and both amps powered up but the HU didn't light up at all and started beeping really fast for the first few seconds then stopped, I hit the reset button on the HU and now nothing powers up (HU, amps, voltage gauge)...I checked both fuses on the amp (1 fuse on red power wire, 1 glass fuse on yellow "back up" wire) both were replaced and I've checked the necessary fuses in the interior fuse box with no luck...

I've already emailed eclipse with no response in 3 days Im guessing that because they shut down all US operations...but I just had an autopage alarm installed about a week before this happened and FYI I have disconnected my battery countless times before with no problems so I don't think this is a eclipse security measure

Is there a fuse on the head unit or wiring harness? Did you check if it's blown?

  • Author

take a small piece of wire and connect it into the power insert on your amp.

Take the other end and touch and hold it inside the remote insert. This will temporarily "jump start" your amp to see if the remote line needs attention.

If your amp comes on, then the headunit needs attention.

Curious as to how the voltmeter gauge is wired up. Where does it connect to?

nah its forsure the HU i do have a decent amount of knowledge about the subject.

the voltmeter is wired to the sub amp and turns on with the radio.

ive checked ALLLL fuses btw

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.