Posted August 29, 200520 yr it says 4kwatts.I found one that a guy has that he says is brand new.I can't find much out about them. Is this thing legit!?4000x1@1ohm at 13.8v?I'll swipe it up if it is.
August 29, 200520 yr 13.8 noI beleive its 17v. Ask Supa_c his bro has one. I beleive that azbass has one too or a similar version.I do know that effendi's (supa's bro) amp didnt like the .5 ohm load he had on it for a while.I was looking at the wrong amp FEATURESHigh current, non-regulated power supplyDouble sided PCBCooling fans (thermal regulated)24db Active slope crossover18db variable frequency bass boostVU MetersVariable phase shift (180 degrees)Line outProtection status indicatorSPECIFICATIONS: Bass Frequency Range- 45Hz to 90HzBass Boost- 0 to 18dbFrequency Response- +/- 1 db from 10Hz to 40KHzSignal to Noise Ratio- >100dbInput Sensitivity- 100mV to 7VChannel Seperation (at 1W)- >60dbDamping Factor (at 1W/50Hz)- >240Typical Current Draw at Idle- 1.4 AmpsPOWER OUTPUT: 4 ohms @ 13.8V DC----- 2 X 400 WATTS2 ohms @ 13.8V DC----- 2 X 700 WATTS1 ohms @ 13.8V DC----- 2 X 1200 WATTS1/2 ohms @ 13.8V DC----- 2 X 2000 WATTSBridged to 1 ohms @ 13.8V DC----- 1 X 4000 WATTSDimensions (W x H x L): 26.4" x 2.3" x 10.8"
August 29, 200520 yr Author 13.8 noI beleive its 17v. Ask Supa_c his bro has one. I beleive that azbass has one too or a similar version.I do know that effendi's (supa's bro) amp didnt like the .5 ohm load he had on it for a while.<{POST_SNAPBACK}>That's the same amp we saw at that show, right?the spec sheet the one guy showed me was 13.8 volts, but i call B.S. It is BIG though. supa? azbass?
August 29, 200520 yr more likely at 17 volts it will push that power. i know my hk602sx pushed just under the rated 3600 at 13 volts. i have it for sale at a good price if interested. they will push a lot of power. and also handle a large voltage coming in, (ask supa lol )
August 29, 200520 yr Author thanks guys I'm most likely gonna go a different, more 'power'ful direction with my 'bass'.Something a little smaller too... that thing is HUGE!
August 29, 200520 yr effendi doesn't have an hk4000d anymore..i bought it..lol..i'll know soon if it can do 3600x1@ 2ohm at 13.8 volts...wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
August 29, 200520 yr Baically i need to know the followingHow much $$ will it cost ?They like power and lots of it. If you do infact buy it be prepared to get a nice H.O alt.The 4000D didnt like the .5ohm because its only rated to 2ohms. But .5 ohms is eaisly done by snipping a few resistors
August 29, 200520 yr Author Baically i need to know the followingHow much $$ will it cost ?They like power and lots of it. If you do infact buy it be prepared to get a nice H.O alt.The 4000D didnt like the .5ohm because its only rated to 2ohms. But .5 ohms is eaisly done by snipping a few resistors <{POST_SNAPBACK}>I can get it new(so he says) for $320 shipped. I've seen one in person, it had like a 350 amp ANL fuse in it. I really think I'm gonna pass at this point on it. There's one on ebay, and a guy from cryaudio has one.
August 29, 200520 yr $320 isnt that bad.I would wait on the Autotek buy from etronics and see if thats legit
August 29, 200520 yr Author $320 isnt that bad.I would wait on the Autotek buy from etronics and see if thats legit<{POST_SNAPBACK}>I've gotten my money back from etronics, but will wait and see if any of the autoteks actually ship from them.I have other irons in the fire, plus I might just wait until comp finals are over and pick up something then. I hear competitors dump their setups for pretty cheap.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.