If'n I post up some specs, would somebody be able to tell me a good size -sealed- box for these 10's?

well yeah....lol

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

well, I knew somebody would be able to..but, re-phrased, I would have said, would somebody be so kind as to figure a sealed box size for me!

Z= 4

Re= 3.2

Pe= 200w

fs= 26.6 hz

Qms= 5.67

Qts= 0.23

Vas= 62.34 L

Le= 2.41 mH

Mms= 97.75 gr

Cms= 0.37 mm/N

Bl= 14.84

SPL= 88.8 db

SD= 346 (cm2)

Xmax= 2.4 cm

thanks!

1.25-1.5ft^3

mucho thanks. I'll give them a shot and see how they sound!

according to bb6p, 1.02 for the pair...but it's not exactly a flat response..lol

go with scott's...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Scott, was your figure for 2 subs, or just one?

Run vented. They sound amazing for their cost.

1.3 cubes tuned to 32Hz is great. 3"D vent is more than enough.

what length is the port?

I was wanting to run them sealed for space. Me and a friend threw together a front to back isobaric enclsoure a few years ago, and it sounded great. I was wanting to try the same with these. I am picking up the jeep cherokee this weekend, but didnt want to take up the whole back end with 2.6cf of box for 2 subs.

For both, have to remember to include displacements to the volume I listed.

i got a pair sealed, maybe 1.5 to both, and they sound pretty good with 125ish watts each.

id like to test them ported though, that would be cool. but i dont wanna ruin the glass boxes

I bought a few sets of ALS13 and ALS16 comps as well as some 4.400 amps from the source but never thought about the subs what are they comparable to in sound and loudness

Closest thing I can compare mine to would be an MTX thunder 6000. That's the cheapest driver I've owned in a few years, so that would be my best comparison.

Beware since the box dimensions are for two subs in a normal mount, if you mount them isobaric you only need 1/4th the volume as you would for the two subs mounted normally. You will lose 6dB or so Isobaric but the subs will handle a bit more power allowing you to make a little of it up. That is such a small box already, so I wouldn't bother with the ISO setup.

sweeet