Posted September 8, 200520 yr I am working on sealed for my 15 as we speak. Anyone come up with one that's 3.5 cubes at 27 that will fit in a trunk?My box will measure16 x 14.5 x 31.5 and end up being the 3 cubes after bracing and displacementJust looking for other good ideas for a box that would work for me and maybe help others who haven't decided on what their doing yet.and....HOLY chit am i excitedi get a tomorrow...
September 8, 200520 yr yes i have, 3cu.ft common chamber box with a removal top baffle. Once you remove that baffle you can remove up to 4 different slabs in the enclosure to change the internal volume and chambers. So i could have 3 1cu ft chambers, 1 2cu ft chamber, 2 1.5 cu ft chambers and so on and since the top baffle is removal all i need to do if i test out different subs or setups is to replace that one baffle and not the entire box.
September 9, 200520 yr man, i'm glad i have a truck, no problem fitting 3.5 tuned to 27, now i just need to grab a magbtw, what is everyone using for power of their mags
September 9, 200520 yr man, i'm glad i have a truck, no problem fitting 3.5 tuned to 27, now i just need to grab a magbtw, what is everyone using for power of their mags<{POST_SNAPBACK}>~300 to start with @4ohm, then ~1100@1ohm if need be.
September 9, 200520 yr The largest box I can fit through my trunk is 17x17x35 which leaves me with a 3.3cuft tuned to 30hz with ~45sqin of port area. I think I might just go sealed. I've got a PG Tantrum 1200.1 to power it.
September 10, 200520 yr Author memphis 16.mc1000d300 at 4 ohms1100 at 1 ohmi wish i could fit ported, but it doesn't look like i canbtw....i got my mag today at noonhehe
September 10, 200520 yr memphis 16.mc1000d300 at 4 ohms1100 at 1 ohmi wish i could fit ported, but it doesn't look like i canbtw....i got my mag today at noonhehe<{POST_SNAPBACK}>Punk I am using the same amp
September 12, 200520 yr btw....i got my mag today at noonhehe<{POST_SNAPBACK}>Yeah, Ollie called me today (Sunday BTW ) to ask me what size screws I used. We honestly just grab what ever we have laying around at the shop. Speaking of which, you should have heard the driver by now Ollie. How about giving the forum and little review??
September 12, 200520 yr Author btw....i got my mag today at noonhehe<{POST_SNAPBACK}>Yeah, Ollie called me today (Sunday BTW ) to ask me what size screws I used. We honestly just grab what ever we have laying around at the shop. Speaking of which, you should have heard the driver by now Ollie. How about giving the forum and little review?? <{POST_SNAPBACK}>my bad nick, i was in a bind and needed a quick answer. i went with the 8's like you said and i've been driving around for the past 4 hours in the dissan.now for a review in a new thread...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.