Posted August 6, 201015 yr Here is my progress of the Big 3 on my Sentra.http://i35.tinypic.com/5flyyu.jpgNow here is the stock grounding point for the battery/engine chassis. (That little screw back there)Since it is in the most extremely awkward position, can I instead ground to here with the new cable?
August 6, 201015 yr Author I dont see why not as long as you scrub the paint down to bare metal.So basically ANY bolt on the chassis will work?
August 6, 201015 yr Hummm, not any bolt. As long as it's not metal connected to plastic or something you should be fine. Between that strut bolt and the metal would be good tho.You could drill a new hole if it's easier on your install, just be sure to paint after you secure the bolt and ring terminal so it dont rust.
August 6, 201015 yr Author Hummm, not any bolt. As long as it's not metal connected to plastic or something you should be fine. Between that strut bolt and the metal would be good tho.You could drill a new hole if it's easier on your install, just be sure to paint after you secure the bolt and ring terminal so it dont rust.Right. Thanks.The engine-chassis is connected at the same point. Guess I'll just find a new bolt for that too.It doesn't have to be the same right? Because the stock ground is the same for both.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.