Posted August 21, 201015 yr So here's the deal, my roomates and I host get togethers at out apartment a lot and what we are really lacking is a a stereo in our downtairs kitchen/living room area and thats where we do most of out partying. In the coming month or so, we are going to construct a bar and I am planning on integrating the sound system into the bar. I want to keep as much space as possible underneath so I do not want to construct enclosures within the front of the bar, rather I'd like to have an open baffle type of alignment. The goals are to have it be somewhat efficient and party proof. By party proof I mean I want it to take abuse. I was thinking multiple 6.5" or 8" woofers on each channel(simple left and right set-up) and dome tweeter, probably titanium dome. Fidelity isn't the number one concern, and I would like to keep costs down so I plan to just use Dayton pre-made crossovers. Just want some feedback oh what you think about some suggestions.3 of these per channel for a 4 ohm loadBravox WFR-06BV02S 6.5" Poly Cone Shielded Woofer 12 Ohm | Parts-Express.comand a set of these tweetersDayton DC28FS-8 1-1/8" Silk Dome Shielded Tweeter | Parts-Express.comand these crossovers will work with the listed frequency response of the drivers without risking damage to the tweeters.Dayton XO2W-3.5K 2-Way Crossover 3,500 Hz | Parts-Express.comThis is just a thought I put together real quick, but I am open to any suggestions. Thanks in advance.
August 21, 201015 yr Author And these would just be ran off of an old Kenwood Receiver I have lying around, about 60 watts per channel.A concern also is the woofers bottoming out since it will be an open baffle alignment and we will listen to anything from rock to some sick bassy dubstep.
August 21, 201015 yr Author yeah something like that, just built into the front of a bar what drivers are you using there and did you make your own crossovers or not?
August 22, 201015 yr todd.brust: Im Running The Dayton Tweeters In my Room The ones you mentioned in your origional post. Theyre clear and can get pretty loud off 50 watts
August 22, 201015 yr yeah something like that, just built into the front of a bar what drivers are you using there and did you make your own crossovers or not?Tang Band W6-1721 6-1/2" Underhung Midbass DriverTang Band W6-1721 6-1/2" Underhung Midbass Driver | Parts-Express.comJAMO 20442 4" Square Frame WooferPart Number: 299-963 3/4" Soft Dome Neodymium TweeterPart Number: 279-114 I don't have any crossovers yet, but I'm sure pe has some
August 22, 201015 yr Author todd.brust: Im Running The Dayton Tweeters In my Room The ones you mentioned in your origional post. Theyre clear and can get pretty loud off 50 wattsGoood to know. I'll definitely keep those in mind for the tweeters. I just don't know if I should go with horns or if dome tweeters will be loud enough.
August 26, 201015 yr Nicceee !That Should get loudddd !if space alows,make it a little wider and put 2 tweeters in the middle while still maintaining the 3 mids on the sides
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.