Posted September 10, 201015 yr Looking for some help with what to put my settings at, I understand most of them, but not all of them. Was hoping you could give your educated opinions on what to set my equipment to. The equipment I am working with is a JL 250/1 (powering two American Bass 12's), an American Pro VS1407 (powering two pairs of Planet Audio 6.5's) and a Blitz 2-way crossover (has a remote bass knob with sub gain and frequency sweep). These are all the settings available to mess with.JL 250/1Full/Low/HighLP Filter Mode/Slope - Off/12dB/24dB - 40Hz - 200HzBass Control Infrasonic Filter - Off/30Hz - 0dB - +15dBAmp Input Input Voltage - Low/High Signal Sensing - Off/OnSingle Input Level knobAmerican Pro VS14071/2 Ch - HPF/Full - 50Hz - 1kHz3/4 Ch - LPF/Full - 30Hz - 250Hz Bass Boost - On/OffSeparate 1/2 Ch and 3/4 Ch Input Level knobsBlitz 2-way CrossoverSingle Input Level knobSubwoofer X-Over Freq - 40Hz - 400Hz Bass Boost - 0dB - +12dB Phase - Normal/Reverse Mode - Stereo/MonoHighs Freq Multiplier - x1 - 40Hz - 800Hz/x10 - 400Hz - 8kHz X-Over Freq - 40Hz - 8kHzSeparate Subwoofer and High Output Level knobs
September 11, 201015 yr Author If any other info is needed I can provide as much as I can, just wanting to make sure I do it right.
September 11, 201015 yr I would recommend searching the forums. There's a sticky somewhere I believe.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.