A few of you guys wanted me to post up pics and vids,of how i started everything,

well here we go.

starting up when the malibu was a virgin lol

2008 malibu ltz 3.6 litters 4 door sedan w/out sunroof feature

2 tone basketball/charcoal interior,

160 stock alternator

premium 6 cd changer upgrade

i started my way out right away and started upgrading my stock audio and entertainment system

my stock visors

aftermarket 14.5 TFT visors

my stock stereo

my old accelevision to play the visors and headrest screens

upgraded it to a alpine iva-w203

bye bye stock stereo and accelevision

audio system

my stock speakers,idk where my other 6.5 went lol sorry

my orions (mounted under the seat)

my rockford 6.5mids and highs

SUBWOOFER SYSTEM

1ST SYSTEM

2 15INCH KICKER CVXsin 99s10walled's Lport box

2nd system(my current system of today,different box)

2 ascendant mayhem 12s

3.5c. ft @35hz,design from brian owens,texas ascendant audio dealer,box built by 991s10walled

pwk desing box(long horn)designed by pete,built by 99s10walled

3.45c. ft @20-80hz-mine peaks at 50hz-

AMPLIFIER:

AQ3,5000D1 (4,3000RMS)

External Fuse Rating 380 Amp in-line, 760 for pair

Tested Voltage 14.4V

Working Voltage 9.5V ~ 18.5V

4 ohm power @ 12V @ 1% THD 750W x 1

4 ohm power @ 14.4V @ 1% THD 1400W x 1

2 ohm power @ 14.4V @ 1% THD 2600W x 1

1 ohm power @ 14.4V @ < 1% THD 4300W x 1

1 ohm Power @ 16V @ 1% THD 5300W x 1

1 ohm Power @ 18V @ 1% THD 6000W x 1

1 ohm Power @ 18V @ 10% THD 7500W x 1

2 ohm Linked Power @ 14.4V @ 1% THD 8600W x 1

2 ohm Linked Power @ 16V @ 1% THD 10600W x 1

2 ohm Linked Power @ 18V @ 1% THD 12000W x 1

2 ohm Linked Power @ 18V @ 10% THD 15000W x 1

Dimensions (mm) 657.2mm (L) x 241.3mm (W) x 66.7mm (H)

Dimensions (in) 25.875in (L) x 9.5in (W) x 2.625in (H)

Power and Ground Inputs 0 Guage x 2

POWER/ALTERNATOR:

my old 270 mechman alternator

It did 165 amps by 700 rpm engine speed, full output by 1800 rpm engine speed.

THE CASING'S MOUNTING HOLES DIDN'T FIT =/

stock 160 alternator's measurements

270 mechman alt

matthew logan from mechman was nice enough to modify one of my extra stock alternator that i had

for the malibu,so it can be a direct fit for sure

my new one

it does over 300 amps by 1800 rpm, with over 170 amps at 700 rpm engine speed.

they tested it in the dyno and it did 319 amps at 1800 rpm engine speed

The most unique part about it, is the fan cooled, external rectifier.This takes all the heat produced by the rectifier, and mounts it remotely, away from the windings of the alternator.This way, the air is not pre-heated before it gets to the windings, so the windings stay cooler, cool down faster.Also, because the rectifier has constant air flow across it at all engine speeds, (courtesy of an electric fan inside the rectifier) it is almost impossible to overheat it.(overheating is a common problem on 300+ amp alternators)

The bus bar on the rectifier makes it easy to hook up huge positive and negative cable runs to the battery(s)

KINETIK HC2000s(UPGRADING)

RIGHT

LEFT

DECALS:

old decal

new decals sent from brian owens,texas ascendant audio dealer

GOODIES:

for the meca show this sept. 11 2010

audio control epicenter

gotta have it for them corridos lmao

stereo harness

video amplifier

LIGHTS:

hids & neon

pilot

blue neon

xenon hids

6k low beams & 8k foggies

3rd new box for you guys to hear ha :drinks:

this one is tuned to 34hz

see what good i can get out of it

box designed by james(audio innovations)

box built by 99s10walled

did some vids when it was being build

and also tooked some pics

(pics are inside 991s10walled's iphone

so as soon i get a hold of the pics i would post them up asap)

and also i would post up the vid tomorrow,i want to add some sub and flex action at the end of the vid,

hopefully youtube wont get this one deleted ha

playing the subs with the 3rd designed box

some pics of the recent system =)

i sealed off the trunk

[bIG THANKS TO MY BUD KEEPINITLOUD FOR HELPING ME OUT FINISHING THIS PROJECT =)]

(in pic 2 aa mayhem 12s)

box tuned to 34hz

upgraded to two xs power d3100s(in pic aq 3,500.d1,AC epicenter for the spanish lol)

did double 0 gauge runs to my amp,fuses,big 3 and new mechman decal =)

(in pic decal 4m techforce,mechman 320amp alt and external rectifier)

i added sound deadening and put the malibu in the t.l

this was last year

did more tweaking,got louder

thanks keepinitloud and randy for letting me use your audio shop =)

finally took out beefy out of the box,i thought it was time =@

and installed to its place,no more stock

Also I highered the temperature on my headlights to 8k

SNEAK PREVIEW/NEW UPDATE

I ADOPTED ANOTHER KID FOR THE MALIBU :drinks:

THIS IS THE AQ3500D.1

IT'S ALREADY STRAPPED TO MY OTHER 3500

I HAVENT REALLY MUCH DONE A LOT OF TESTING CUS I WAS REALLY BUSY FINISHING

THE SILVERADO'S BOX YESTERDAY,BUT IT'S HOLDING ON PRETTY WELL

Edited February 4, 201114 yr by deepsilencer

Looks nasty bro...love when I see fellow malibu owners

One of the nicest malibus ive seen man. Great work

Awesome Build pics Bro !!!

Real clean looks... Love the white!

you gotta do a video with some corridos alterados... lol

you gotta do a video with some corridos alterados... lol

you know what, I want some reggaeton happening on that system... When I get my ported enclosure I will be doing some vids of reggaeton since no one seems to have that going on... lol

how much was your current ALT and the 270A one? Do you still have the 270A?