Memphis doesn't carry them in their site. Did some searching but only came up with the subs or some other t/s parameters . I doubt the place that sells them here will give them up cause they make boxes. They are kinda like that. They gave me recommended optimal. The port however doesn't make sense. I used Torres calc. To do their recommended port size. It's way too small IMO. 4ft^3 for two 12's with a port of 12x2.5x19long which tunes it to 28hz. I wanted to get what the actual T/S parameters are so I can get an accurate idea of how to build it.

Edited October 2, 201113 yr by srd150

I just sent Memphis an email asking for the specs. I'll post them up if they reply.

Thanks!

Thanks again.

Thanks again.

No problemo.

What size enclosure did you come up with for these. So far I'm at 4.2 ft^3 tune to 38Hz. I just want to make sure that I'm on track. It's for two of them BTW.

Edited October 13, 201113 yr by srd150

I never modeled them, just got the specs for you

That's cool thanks.anyhow.

I can model them later in winisd, but im sure id just get the same as you.

Probably. Thanks for getting the info for.me.