Posted August 10, 201213 yr in the process of making my last back Toyota symbol matte black. will be doing the grill and front emblem tomorrow Edited August 10, 201213 yr by Chainsaw
August 10, 201213 yr Author Hope that cleans up easy, looks like you oversprayed onto your paint.the good thing is that it is a rubber compound. it peels off when done. a micrfiber towell will buff off small spots and large spots peel off like a sticker
August 11, 201213 yr Author just got home from visiting wife's family. i should have some finished pics of the back up tomorrow. i will also do the grill and get "before", "during", and "after" pics of it. if the can is still full enough, i may do the factory hubcaps as well.
August 11, 201213 yr Author looks hot! I was thinking about doing something to mine too a little over $5 per can and completley reversible if you don't like it; go for it!!!
August 11, 201213 yr I was told if plati-dipping lenses (for lights) to put a coat of wax on before hand and spray from farther distance to give it more clarity.... The distance part was not 100% from the person that told me... But I will try it out on an old busted tail light to see the affect...
August 11, 201213 yr Author Sweet I will also be doing my emblems and grill. Any tips?tape arround it , but leave a little room with the paint still exposed. like make a box a few inches away from the badge on all sides. use Several coats. the more coats actually make it easier to peel off the excess in the box area you created, but even thin overspray can be tidied up with a little elbow grease, water and a microfiber towell. the youtube videos i saw suggested using a toothpick to get the center of embles peeled( i.e. my factory paint that is inside circles of Toyota symbol.) check out dipyourcar.com and their subdequent YouTube videos. they use gallons and do whole cars that are way above my pay grade. the main owner has had his audi s4 at least 3 different colors since i statted looking at them. they also sell everything you need to do your own whole car.edit: totally still up this late, feeding my newborn son a bottle :-) Edited August 11, 201213 yr by Chainsaw
August 11, 201213 yr Author done on backbefore grillgrill came off easily so prep eould be easier. first coat in pic. i just put the third coat on and waiting for it to dry so i can reinstall
August 11, 201213 yr Author Holy shit, do you need to polish your headlights.why yes, yes i do. any suggestions on what works?
August 11, 201213 yr I just use a regular towel with dish wash soap... Then wax the lens... But mine was never that bad when I did it.. I just up keep it like that...
August 12, 201213 yr Author started on the factory hubcaps and ran out of plasti-dip. after that, the only chrome on my car will be the strip under the windows. that may go as well
August 13, 201213 yr I've been contemplating doing this to the grille, and chrome interior pieces on my car. My wheels are a gunmetal-like color already, so the chrome kinda looks off. Does it peel off easy, or is it like a window sticker or would I need a hair dryer and lots of patience, cuz my grille is relatively large?
August 13, 201213 yr Author it peels like a balloon stuck to something would. as long as you apply it generously(2-4 thick coats) it will peel just fine. thin overspray can be buffed out with a towel. i heard goo gone or any alcohol based cleaner will make it wipe right off
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.