August 31, 201213 yr 12x14 port. We are still playing.Brain fart on port area. Edited August 31, 201213 yr by nem
August 31, 201213 yr Author With aeroports you can get away with less port area but not that much. I looked up specs and found xmax at 22mm. I think you should shoot for closer to 200 in^2 of port area. 2 6" aeros are not even 60 in^2.Granted my Q has a higher xmax and I'm tuned fairly low but I have over 100 in^2 for one. On my SD X12 I jumped up port area on one of the boxes and there was a big difference in output.I'm not a pro box builder by any means. But I've built enough crappy boxes to learn a little haha.Edit: I'm looking at your print again. You have 12" dia port on that one. That would be 113 in^2 which is a lot better. Correct and dont forget to include the lenght as well. i know 12'' is a big hole haha but if we go 2 6'' with 7'' of length then it should get a nice little tune going correct? still learning but this is what nem had explained to me.
August 31, 201213 yr Author 12x14 will get 168 in of port. I am still playing with that I want at least 180 inches. We are still playing. couldnt we put another in and a half on the lenght? would that make a difference?
August 31, 201213 yr 12x14 will get 168 in of port. I am still playing with that I want at least 180 inches. We are still playing. couldnt we put another in and a half on the lenght? would that make a difference?Did he look and see what pipe he has?We can do 4 6" areos, no problem. Edited August 31, 201213 yr by nem
August 31, 201213 yr Author 12x14 will get 168 in of port. I am still playing with that I want at least 180 inches. We are still playing. couldnt we put another in and a half on the lenght? would that make a difference?Did he look and see what pipe he has?We can do 3 6" areos, no problem. No i was hopping to go up today bud i had to go home for dinner....
August 31, 201213 yr 12x14 will get 168 in of port. I am still playing with that I want at least 180 inches. We are still playing. couldnt we put another in and a half on the lenght? would that make a difference?Did he look and see what pipe he has?We can do 3 6" areos, no problem. No i was hopping to go up today bud i had to go home for dinner....When you find out text me, I will be at work all weekend.
August 31, 201213 yr With aeroports you can get away with less port area but not that much. I looked up specs and found xmax at 22mm. I think you should shoot for closer to 200 in^2 of port area. 2 6" aeros are not even 60 in^2.Granted my Q has a higher xmax and I'm tuned fairly low but I have over 100 in^2 for one. On my SD X12 I jumped up port area on one of the boxes and there was a big difference in output.I'm not a pro box builder by any means. But I've built enough crappy boxes to learn a little haha.Edit: I'm looking at your print again. You have 12" dia port on that one. That would be 113 in^2 which is a lot better.No worries
August 31, 201213 yr Author 12x14 will get 168 in of port. I am still playing with that I want at least 180 inches. We are still playing. couldnt we put another in and a half on the lenght? would that make a difference?Did he look and see what pipe he has?We can do 3 6" areos, no problem. No i was hopping to go up today bud i had to go home for dinner....When you find out text me, I will be at work all weekend. Okay well saturday we are going to pittsburg and sunday idk if i work or not so we will see.
August 31, 201213 yr Check this link out, it will help you.http://www.soundsolutionsaudio.com/forum/topic/40146-calculating-port-area-with-aero-ports/
August 31, 201213 yr Author Okay, are we doing flairs or is it going to be straight? coz i thought we were going with straight coz we werent chasing numbers?
August 31, 201213 yr Okay, are we doing flairs or is it going to be straight? coz i thought we were going with straight coz we werent chasing numbers?Straight. I just posted that so you see that going round you can use a little less.
September 7, 201213 yr it has been raining joe! He has the holes cut and ports in. Us old heads don't slack like u young fellas. Lol
September 7, 201213 yr it has been raining joe! He has the holes cut and ports in. Us old heads don't slack like u young fellas. LolYou tell him Joe! I think they sleep too much and that is why they don't get much done. Edited September 7, 201213 yr by nem
September 7, 201213 yr Author it has been raining joe! He has the holes cut and ports in. Us old heads don't slack like u young fellas. LolYou tell him Joe! I think they sleep too much and that is why they don't get much done. school may have a large part in that too haha
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.