Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

I have an 07 Dodge Ram 3500 Mega Cab

My head unit is:

- Kenwood KDC-BT852HD. Which is 50W x 4

In my front doors I have:

- Alpine Type R SPR-69 speakers. Which is RMS 100w & Peak 300w

In the rear doors I have:

- Alpine Type R SPR-60 which is RMS 100w & Peak 300w

For my sub I have:

- Alpine Type R SWR-12D2 which is RMS 1000w and Peak 3000w

Now I need help on choosing an amp to power everything and I`d like to

get the most out of all 4 speakers and sub. I have a list below of amps that will work with my system.

Which two amps would be best for my set up?

Thanks!

Sub amps:

- Nakamichi - PA-1500 1200 Watt RMS Mono Digital Bass 1 Ohm Amplifier

- TXA-1000D - Cadence Class D Mono Power 1000 Watt Amplifier

- Q1-1200D Amplifier

- Rockford Fosgate T1000-1bdCP (t10001bdcp) (2010 Model) 1000W RMS

- Polk PA D1000.1

- Power Acoustik - 2000W Class D Mono Amplifier with Bridging Synchronization

Speaker amps:

- Cadence Acoustics ZRS C9 600 Watt Peak 16V 4-Channel Class AB Amplifier

- Alpine MRX-F65 4-Channel 640W RMS Amplifier

- Rockford Fosgate T400-4 Power Series Compact 4-Channel Amplifier

- Audioque AQ 120.4

- JVC - 1000W Class AB Bridgeable Multichannel MOSFET Amplifier with Bass Boost Control

- Pioneer - 800W Class D Bridgeable Multichannel Amplifier with Variable Low-Pass Filter

If you only want what is listed I would go for both Rockford amps personally. They do good rated power and will last. That 4 channel will work but the speakers you have I'm sure are 4ohm so ideally something that does 100 x 4 @4ohms is what you will want. (T600.4)

  • Author

If you only want what is listed I would go for both Rockford amps personally. They do good rated power and will last. That 4 channel will work but the speakers you have I'm sure are 4ohm so ideally something that does 100 x 4 @4ohms is what you will want. (T600.4)

Thanks, how do I check if the speakers are 2 or 4 ohm?

Check the back of the speakers. They might say what they are on the back. If not, you can use a DDM to find it.

If you only want what is listed I would go for both Rockford amps personally. They do good rated power and will last. That 4 channel will work but the speakers you have I'm sure are 4ohm so ideally something that does 100 x 4 @4ohms is what you will want. (T600.4)

Thanks, how do I check if the speakers are 2 or 4 ohm?

Look at the back of them. Those will say 4ohm or 8ohm. I dont even know if Alpine sells the Type R's in 8ohm honestly.

The sub is a D2 and would work good wth the Rockford amp wired at 1ohm

the speakers are 4ohm

From your list, Rockford.

They do good rated power and will last.a128.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.