June 4, 201510 yr So you know what company it is, go down and talk with them. Ask to do a welding test and if pass, a job.My BIL runs a big stainless welding shop and that is exactly what he does. I'd not hesitate at all to do so. Worst case offer to have them hire you at $8/hr for the first two weeks why you learn if they are unsure. Beware of getting stuck, but maybe make a map from $8 to $17 and how long you expect to show them you are worth it.I get $17hr to prostitute drunk Damn your a cheap hookerROFL
June 4, 201510 yr Got the keys to my first home today and the first thing I do? Check to see if the LBZ fits in the garage. It fits if I back it in, but can't pull forward unless I get a roll pan and lose the rear bumper. Never been a fan of roll pans on lifted trucks but I'll think about it...Wait, it is longer in fwd than rev??Congrats on the house btw. thanks, I'm very excited to tear into the house. I build houses for a living so I already have a laundry list of things to do to make it how I want Yeah the truck coming in forward hits the tire stop and is about 6" from the wall, but that isn't enough to get the rear bumper within the garage door tracks. If I back it in I would hit the wall before the tire bump, but I'll put some 2x material there to make a tire bump that I hit before the wall. It's a lesser of two evils thing, but I'll probably go with backing it in since I won't have to modify the truck at all. I really don't like roll pans and installing one just to be able to pull into the garage seems like a dumb thing to do. I've never seen a concrete tire stop before. Didn't even notice it in the picture, lol.Amusing since I looked at over 300 houses before buying this one and have since probably at least seen 200 more. interesting, I wonder if it's just a southern thing, but it's usually 30 - 36" from the wall. Now it also depends on ADA requirements in the City of Austin with their visitibility stuff, if they deem the garage to house door as the handicap access for the home. Edited June 4, 201510 yr by ILuvJDM
June 4, 201510 yr I do have a tennis ball hanging from my rafters for mine....but I also have about 1/2" in front of my truck and behind when my hitch is on which is nearly all winter lol
June 4, 201510 yr The OBD2 steering wheel controls did not work with my mini-ELM327 clone. The J1850 bus was not even connected to the processor. Chinese "works with all protocols" . This is on my to-do list as well.
June 4, 201510 yr I do have a tennis ball hanging from my rafters for mine....but I also have about 1/2" in front of my truck and behind when my hitch is on which is nearly all winter lol do you have a step into the house or is the threshold on the same grade as your garage floor? Part of the bumps purpose is protect from water intrusion as well
June 4, 201510 yr This post was brought to you by the LG G4 in brownish/tan leather."LG G4, fuck yeah!"-LG G4 users everywhereBout time slow assI just got a second phone 10 min ago too.:-)Two fisterThat's what she said.I had 2 dead pixels.Had to get that new new.
June 4, 201510 yr I take everything too far. Always have, always willThat time on the boat cemented that into my brain forever.No gag reflex at all.Context's a bitch.Only real men can pound coors light like that.Arguably the BEST boat beer.
June 4, 201510 yr The OBD2 steering wheel controls did not work with my mini-ELM327 clone. The J1850 bus was not even connected to the processor. Chinese "works with all protocols" . This is on my to-do list as well.Ha, found my green wire today. I have a SWI-RC and a Joyconn. Since the SWI does not do CAN bus I wonder if I just don't need it. Figure a resistance check on the green wire to ground or power ought to tell me. Curious how you all would wire tap it as well. I'd normally just cut and either solder or solderless, but that'll be annoying. It came with a 3M tap, but I don't trust those at all...although that stems from a bad amp install when I was 14 lol
June 4, 201510 yr I do have a tennis ball hanging from my rafters for mine....but I also have about 1/2" in front of my truck and behind when my hitch is on which is nearly all winter lol do you have a step into the house or is the threshold on the same grade as your garage floor? Part of the bumps purpose is protect from water intrusion as wellEven if mine were flat it wouldn't matter it is sloped and my yard is sloped like a cliff.
June 4, 201510 yr I take everything too far. Always have, always willThat time on the boat cemented that into my brain forever. No gag reflex at all.Context's a bitch. Only real men can pound coors light like that. Arguably the BEST boat beer.And the only place I drink water like that. Brown bottled beer on a boat is a horrible idea.
June 4, 201510 yr I have been drinking the fuck out of a beer called Session 12 pack of 11 ounce stubby bottles for 10 bucks.So god damn good for that price. Amazing clean lager. The black Guinness knock off is really good too.
June 4, 201510 yr How did you tell you had dead pixels and it was 2. They are fucking small!!White background pages and it stuck out like a sore thumb. This second phone has a much better screen in general. There must have been more than 2 pixels as a problem.This is the most beautiful screen i have ever used. Even through the screen protector it's glorious. Text is sexy. That is a weird statement but it is.I didnt think i would care about Q HD but it's the hotness.
June 4, 201510 yr Gay Porn is probably gonna be great.I knew there was something wrong with you, I just didnt know you would end up coming out of the closet on an audio forum.
June 4, 201510 yr The OBD2 steering wheel controls did not work with my mini-ELM327 clone. The J1850 bus was not even connected to the processor. Chinese "works with all protocols" . This is on my to-do list as well. Ha, found my green wire today. I have a SWI-RC and a Joyconn. Since the SWI does not do CAN bus I wonder if I just don't need it. Figure a resistance check on the green wire to ground or power ought to tell me.Curious how you all would wire tap it as well. I'd normally just cut and either solder or solderless, but that'll be annoying. It came with a 3M tap, but I don't trust those at all...although that stems from a bad amp install when I was 14 lol Is it safe to assume that if you read +12v between the wire and ground that you're dealing with a canbus signal? I think thats the case with mine... if you want to throw some money at it, here's an option
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.