Jump to content
View in the app

A better way to browse. Learn more.
SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Strapped BC2000ds on Xcons

R3dt34rz
in Amplifiers / Head Units / Processors / Electrical

Featured Replies

Posted

Gents,

Just curious if I can run my Xcon D2s at 0.5 ohms and be good, or should I just run them at 2 ohms? Electrical consists of 3 XS Power D3400s ( 1 as a front batt, 2 in the rear). I ran all zero for the Big 3, and currently have a HO alt of 250a from Excessive Amperage in the works. Just wondering how I should wire the subs on these amps. Any input is appreciated.

Also this is a daily driver, if that means much. Thanks.

Edited by R3dt34rz

  • Quote
    • 0

    I would wire to 2 ohms for sure.

  • Quote
    • 0

    2 ohms is where your going to want/need it.

    Both amps will be at 1 ohm each.

  • Quote
    • 0

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Reply to this topic...
    Go to topic listing

    Recently Browsing 0

    • No registered users viewing this page.

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.