Posted March 6, 201312 yr Looking to buy a saz 2500 and just seeing what you guys think i should do about electrical to power the amp. It'll be pushing a sp4 reconed by psi audio, they told me that it will be 2500 rms or better. ill be running the amp at .5 ohm. For electrical so far i have the big 3, a 350 amp alternator by bnr parts (junk by the way) looking for a 270 amp alt by mechman and a xs power d3400 under the hood with all 1/0 gauge. Just trying to get some help with what i should upgrade to run .5 ohms daily. looking to get dual toolmarker 1/0 for the power and ground for 2 runs of 1/0 wire. should i be looking at another battery? and what if i got just a smaller battery and put the 3400 in the back? Any help is greatly appreciated.
March 6, 201312 yr You are looking at 250 amps of draw so a good alternator and an extra battery should be sufficient.
March 6, 201312 yr dont run it at .5Yes I would also advise against running it at .5 simply because it isn't covered under warranty if it shits out which is very likely if you push it too far.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.