Posted March 18, 201312 yr So, been out of Car Audio for a bit, been wanting to put another small system in, every time something seems to come up.. So I'm trying again... Vehicle: 2005 Chevy Trail Blazer So far I have the following...Pioneer Head unit,Polk Separates in all 4 doors. Parts I have acquired:Sundown 2000D (these Sundowns are are few years old But BNIB) (Needs 200 Amp Ext Fuse)Sundown 125.4 (fuse 30x2)15" FI BTL (Same with the FI Sub, BNIB) I would like to figure out what all exactly I need to do get and do so the two Amps have plenty of power. No Blinking lights, or any power problems...I was thinking,Update front Batt (not sure what)Mechman Alt (not sure which one)Big 3Two Fused Runs of 0/1 to rear1 or More Batts (the less room the better) (Was thinking an XS d6500)Some kinda Distro/Buss Bar setup to connect the two amps... I don't really see adding more amps or devices to this system for the foreseeable futureI can wire stuff up, but I have Zero box building skills, so unless someone has other recommendations, I'm thinking about a Pre-made Fatboxusa Box...http://www.fatboxusa...losure-box.html I know most folks here frown on pre-made Enclosures, but I'm not looking at doing car shows, comps or to show off, I just want a fairly banging system, without going in 20K.... In a year or so, when I get a lot more credit cards paid off, I'd like to re-do a much bigger system in a secondary vehicle...
March 18, 201312 yr I had a trailblazer with number of systems in it.I had a 275a singer alt with a deka 9a31. I had 3 runs of 1/0 an big 3 done. Stock front batt.Never went below 13.5v with my bc2k. Also had a small 4 channel alpine amp too.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.