Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

So this the story guys. I "supposedly" have 2 DC level 3 15s dual 4s and am currently running maybe 500 rms total. I set gains with a dd1 and everything is set the way it should be. Crossovers have also been properly set for my application. These subs apparently have no cooling capability whatsoever has I can hear the dust cap rattling from too much heat.... I pucking hate these things and don't know why I bought them. Any suggestions on if I am wired at the amp wrong? I am wired at 4 ohms total load right now but I don't know. I have a precision power black ice 1800d and I heard the wiring for this amp is a little different? Any help would be appreciated

Sincerely,

Mlcantin

  • Replies 60
  • Views 10.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Maybe if you listen to the tone that you set it with and nothing else...

  • It didn't I failed at reading.

  • I had a sundown e12 and it slammed. Didn't sound that great though but it took abuse. The dcs sound way better but can't take power

how do you have your subs wired. in parallel or series? high chances are, dc isnt the sub choice for you. what are you trying to do with your app spl, or sound quality.

Set your gain by ear, the DD1 is useless for what you are doing. Take a picture of your subwoofer wiring.

With the very little info given. I'd go as far to assume that you have the coils out of phase.

  • Author

Set your gain by ear, the DD1 is useless for what you are doing. Take a picture of your subwoofer wiring.

I did both. Gain by eat and by dd1 and still rattling.
  • Author

how do you have your subs wired. in parallel or series? high chances are, dc isnt the sub choice for you. what are you trying to do with your app spl, or sound quality.

they sound decent and are loud to boot. Cooling just doesn't work apparently

 i set my gains with a cat turd. its about the same as a DD1.. it seems like you may have another issue .

 

 but

 

 

dc blows IMO.

what do you mean the cooling doest work.. who told you this.. and explain how  the cooling stops working?

How are you determining that the cooling isn't working?

  • Author

With the very little info given. I'd go as far to assume that you have the coils out of phase.

And what does this look like?

what do you mean the cooling doest work.. who told you this.. and explain how  the cooling stops working?

 its DC.....

  • Author

what do you mean the cooling doest work.. who told you this.. and explain how  the cooling stops working?

I had a sundown e12 and it slammed. Didn't sound that great though but it took abuse. The dcs sound way better but can't take power

Not a very good comparison.

  • Author

How are you determining that the cooling isn't working?

The cooling is working because the dust cap is hot and when I touch the coil it is very hot to the touch. On 250 rms per sub

If you ran 250 watts thru those subs for a period of time and physically touched the coil im surprised it didn't burn the piss out if you.

oh hell.

i had some minor issues with my XLs not liking 3k per sub over 40sec at a time.. 

 

I attenuated it to a non-clipped output and would start stinking after 2min.. so i gave up, lol.. 

 

This is M1s.. hopefully M2s are better.

How are you determining that the cooling isn't working?

The cooling is working because the dust cap is hot and when I touch the coil it is very hot to the touch. On 250 rms per sub

Some heat is normal. How do you know they are getting 250 a piece?

If you're playing a song on tuning it's not going to cool..the coils don't move enough to cool anything

 

@ tuning 

 

DD-1 works fine, if you use it right. Not setting your gains with -15....

  • Author

How are you determining that the cooling isn't working?

The cooling is working because the dust cap is hot and when I touch the coil it is very hot to the touch. On 250 rms per sub
Some heat is normal. How do you know they are getting 250 a piece?
rough approximate through mathematical calculations
  • Author

i had some minor issues with my XLs not liking 3k per sub over 40sec at a time.. 

 

I attenuated it to a non-clipped output and would start stinking after 2min.. so i gave up, lol.. 

 

This is M1s.. hopefully M2s are better.

I have the m2s bleh

If you're playing a song on tuning it's not going to cool..the coils don't move enough to cool anything

 

@ tuning 

 

DD-1 works fine, if you use it right. Not setting your gains with -15....

Maybe if you listen to the tone that you set it with and nothing else...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.